CH3NH3PbI3 perovskite nanofibers were synthesized by versatile electrospinning techniques. The synthetic CH3NH3PbI3 nanofibers were characterized by X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, and photoluminescence. As counter electrodes, the synthesized nanofibers increased the performance of the dye-sensitized solar cells from 1.58 to 2.09%. This improvement w...

Inverse-vulcanized polymeric sulfur has been prepared and utilized for solid-state dye sensitized solar cells. A power conversion efficiency of 1.5% was recorded with a short-circuit current of 4.1 mA cm(-2) and an open-circuit voltage of 0.75 V under standard AM 1.5G illumination (1000 W m(-2)). The results in the present study qualify the new polymeric sulfur material as a future candidate as...

Highly ordered anodic TiO2 nanotube arrays fabricated by electrochemical anodization were sensitized with ruthenium dye N-719 to yield dye-sensitized TiO2 nanotube solar cells. Rational surface treatments on photoanode TiO2 nanotubes markedly improved the device performance. With TiCl4 treatment, in conjunction with oxygen plasma exposure under optimized conditions, dye-sensitized TiO2 nanotube...

Conventional dye-sensitized solar cells have excellent charge collection efficiencies, high open-circuit voltages and good fill factors. However, dye-sensitized solar cells do not completely absorb all of the photons from the visible and near-infrared domain and consequently have lower short-circuit photocurrent densities than inorganic photovoltaic devices. Here, we present a new design where ...

Nickel nitride electrodes were prepared by reactive sputtering of nickel under a N2 atmosphere at room temperature for application in mesoscopic dye- or quantum dot- sensitized solar cells. This facile and reliable method led to the formation of a Ni2N film with a cauliflower-like nanostructure and tetrahedral crystal lattice. The prepared nickel nitride electrodes exhibited an excellent chemic...

Exploiting an alternative of the Pt-based counter-electrode materials for the triiodide reduction reaction has become a major interest in the fundamental research of dye-sensitized solar cells. Transition-metal selenides have recently been demonstrated as promising non-precious metal electrocatalysts for the triiodide reduction reaction. Herein, we prepared a series of transition-metal selenide...

In the context of solar energy exploitation, dye-sensitized solar cells and dye-sensitized photoelectrosynthetic cells offer the promise of low-cost sunlight conversion and storage, respectively. In this perspective we discuss the main successes and limitations of modern computational methodologies, ranging from hybrid and long-range corrected density functionals, GW approaches and multi-refere...

The current global energy problem can be attributed to insufficient fossil fuel supplies and excessive greenhouse gas emissions resulting from increasing fossil fuel consumption. The huge demand for clean energy potentially can be met by solar-to-electricity conversions. The large-scale use of solar energy is not occurring due to the high cost and inadequate efficiencies of existing solar cells...

a  commercial  ti-nanoxide  was  deposited  on  in-doped  sno2 (ito) polymer  substrates by  tape casting  technique with different thicknesses  (7,  14  and  36μm)  to  be  used  as  photoelectrode  in flexible  dye-sensitized  solar  cells  (dsscs).  ruthenium  dye  was adsorbed on each tio2 film for 24 h. the resulting photoelectrodes were used to form flexible dsscs in combination with elec...

The performance of a new dye-sensitized solar cell (DSSC) based in a natural dye extracted from the Bougainvillea spectabilis' bracts, is reported. The performance of this solar cell was compared with cells prepared using extract of the Bougainvillea glabra and mixture of both extracts; in both cases the pigments were betalains, obtained from Reddish-purple extract. These dyes were purified to ...