OBJECTIVES. Sandblasting is a common method to try to improve the Y-TZP/veneer bond strength of dental prostheses, however, it may put stress on zirconia surfaces and could accelerate the t→m phase transformation. Y-TZP sandblasting before sintering could be an alternative to improve surface roughness and bonding strength of veneering ceramic. The aim of this study was to analyze the effect of ...

The aim of this work was to evaluate the influence of specimen preparation and test method on the flexural strength results of monolithic zirconia. Different monolithic zirconia materials (Ceramill Zolid (Amann Girrbach, Koblach, Austria), Zenostar ZrTranslucent (Wieland Dental, Pforzheim, Germany), and DD Bio zx² (Dental Direkt, Spenge, Germany)) were tested with three different methods: 3-poi...

Recent accreditation of titanium powder products for commercial aircraft applications marks a milestone in titanium powder metallurgy. Currently, powder metallurgical titanium production primarily relies on vacuum sintering. This work reported on the feasibility of powder sintering in a non-vacuum furnace and the tensile properties of the as-sintered Ti. Specifically, we investigated atmospheri...

ransparent polycrystalline alumina (PCA) is a promising replacement for sapphire. Its optical properties however are highly dependent on the rain size and residual porosity which need to be controlled for real inline transmittances (RIT), that are high enough for possible applications. To achieve high RITs, doping as well as pressure assisted sintering is often used. In this study spark plasma ...

There is considerable interest in processing technologies which can lead to more energy efficient sintering of metal powders. The use of microwave sintering in particular leads to reduced energy usage during sintering as the volumetric heating process is considerably more efficient compared with resistance heating. In this study the use of a novel plasma microwave processing technology for the ...

The low hardness and strength of aluminum, which limits its use in many industrial applications, could be increased through the addition of nanoparticles. However, the appropriate processing method and parameters should be carefully selected in order to achieve the desired improvement in properties. In this work, aluminum was reinforced with low weight fraction (1 wt.%) of SiC nanoparticles and...

Using ZnO as a model system, the densification mechanisms of flash sintering are investigated. Controlled experiments via limiting the maximum current or the effective ramp rate suggest that both the maximum specimen temperature and the high heating rate (on the order of 200 C/s) are essential for the rapid densification during the flash sintering. Moreover, benchmarking rapid thermal annealing...

A two stage process including a sintering under a cyclic loading is proposed as an alternative fabrication method of dense FeAl intermetallics from elemental powder mixtures. The first stage (pre-sintering) is conducted at two temperature values (620 °C and 670 °C, respectively) under a static and a cyclic loading with a frequency of 20, 40 and 60 Hz. The second one includes a pressureless sint...

In the selective laser sintering (SLS) manufacturing technique a pre-heated layer of material powder undergoes a laser radiation in a selective way to produce three dimensional metallic or polymeric solid parts. Here, we consider sintering of polymer powder. The phase transformation in this process involves the material heat transfer which is strongly affected by the material sintering phenomen...

In this paper, we present a mathematical model that describes the calcination and sintering of calcium-based sorbents in furnace sorbent injection (FSI) conditions. We assumed that the sorbent decomposition follows a shrinking core model with a changing pore size distribution in every layer and we used a comprehensive mathematical model for sintering. Cylindrical and plate-like or slit pore geo...