Spark plasma sintering (SPS) is currently widely applied to existing alloys as a means of further enhancing the alloys' figure of merit. However, the determination of the optimal sintering condition is challenging in the SPS process. This report demonstrates a systematic way to independently optimize the Seebeck coefficient S and the ratio of electrical to thermal conductivity (σ/κ) and thus ac...

(Ti,Zr)C powder was sintered with WC-Co following an industrial process, including an isotherm at 1410 °C. A series of interrupted sintering trials was performed with the aim of studying the sintering behavior and the microstructural evolution during both solid-state and liquid-state sintering. Reference samples, using the same elemental compositions but with the starting components TiC and ZrC...

PURPOSE This study aimed to identify the effects of the sintering conditions of dental zirconia on the grain size and translucency. MATERIALS AND METHODS Ten specimens of each of two commercial brands of zirconia (Lava and KaVo) were made and sintered under five different conditions. Microwave sintering (MS) and conventional sintering (CS) methods were used to fabricate zirconia specimens. Th...

Selective electron beam melting (SEBM) is a relatively new additive manufacturing technology for metallic materials. Specific to this technology is the sintering of the metal powder prior to the melting process. The sintering process has disadvantages for post-processing. The post-processing of parts produced by SEBM typically involves the removal of semi-sintered powder through the use of a po...

We have studied the combined effects of the templated grain growth and magnetic alignment processes on sintering, anisotropic sintering shrinkage, microstructure development and texture in ZnO ceramics. Suspensions of 0-10 vol % ZnO template particles were slip cast in a 12 T rotating magnetic field. Sintering and texture characteristics were investigated via thermomechanical analysis and elect...

In this study, the procedure of sintering and heat treatment of Al2O3-SiC-MgO nanoceramic was considered. For improving the densification behavior and mechanical properties, experimental variables, such as sintering temperature and duration, which significantly influence the fracture performance of this nanocomposite body, were optimized. To obtain desired properties, several tests were conduct...

In an effort to extend the tempering methodology, we propose simulated sintering as a general framework for designing Markov chain Monte Carlo algorithms. To implement sintering, one identifies a family of probability distributions, all related to the target one and defined on spaces of different dimensions. Then, a Markov chain is constructed to move across these spaces, with the hope that the...

Electric current activated/assisted sintering (ECAS) techniques, such as electrical discharge sintering (EDS) or resistive sintering (RS), have been intensively investigated for longer than 50 years. In this work, a novel system including an electrically insulated graphite die for Spark Plasma Sintering (SPS) is described, which allows the sintering of any refractory ceramic material in less th...

The effect of frequency and sintering temperature on initial permeability of Ni0.55Zn0.45Fe2O4 ferrites have been studied by using an impedance analyzer. The samples were prepared by conventional double sintering ceramic technique using oxide nanoparticles of grain size 30 50 nm. Single phase spinal structure has been confirmed for the prepared samples by X-ray diffraction. As the sintering tem...

In this study; iron based powder metal (PM) bushing compacts were sintered via medium frequency induction heating system. Iron based powders were mixed with 2 wt.% copper (Cu), 0.3 wt.% carbon (C) and 1 wt.% zinc stearat (Zn-st) via V-Type mixer. PM compacts were sintered by 2 different sintering processes. One of them was conventional sintering method other was medium frequency induction sinte...