In this research, two radiofrequency identification (RFID) antenna sensor designs are tested for compressive strain measurement. The first design is a passive (battery-free) folded patch antenna sensor with a planar dimension of 61mm × 69mm. The second design is a slotted patch antenna sensor, whose dimension is reduced to 48mm × 44mm by introducing slots on antenna conducting layer to detour s...

In this paper, two compact patch antenna designs for a new application — outdoor RF energy harvesting in powering a wireless soil sensor network — are presented. The first design is a low-profile folded shorted patch antenna (FSPA), with a small ground plane and wide impedance bandwidth. The second design is a novel FSPA structure with four pairs of slot embedded into its ground plane. Performa...

This paper presents the theoretical investigation of a slotted patch antenna. The main objective of proposed work is to obtain a large bandwidth antenna with reduced size. The antenna has a compact size of 21.1mm x 20.25mm x 8.5mm. Two designs with minor variation are studied which provide wide impedance bandwidths of 24.056% and 25.63% respectively with the use of parasitic elements when excit...

This article presents a compact wideband microstrip-fed planar monopole antenna composed of a rectangular patch and slotted ground structure. By placing pair of symmetrical square stubs, making slots in the stubs, putting stubs on the sides of the radiating patch, gives wide-band characteristics. The antenna only one of its kinds in structure, small in size and simple design due to less number ...

In this paper, the design of a microstrip patch antenna with frequency selective surface (FSS) as a superstrate for WLAN and WiMAX applications proposed antenna is designed by using substrate FR4 having permittivity of 4.4 and air substrate. The characteristics of the antenna are designed and evaluated the performance of modelled antenna using CST Microwave studio. The proposed resonant frequen...

Introduction The microstrip patch antennas are widely used in modern communication system due to low profile, low weight, low cost However, the antennas suffered from narrow bandwidth and low gain.[6 The major need for modern communication devices is to operate at wider band such as to support high speed internet, multimedia communication and similarly many more broadband services, this is achi...

This paper presents a low-cost patternreconfigurable microstrip antenna. The proposed design strategy uses a slotted patch antenna on a bi-layer structure as basic element of a switched parasitic array. Reconfigurability is obtained by means of PIN diodes used to vary the resonance frequency of the parasitic patches. Experimental results referring to a prototype consisting of an array of three ...

We report in-plane slotted patch antenna-coupled electro-optic phase modulators with a carrier-to-sideband ratio (CSR) of 22 dB under an RF power density of 120 W/m(2) and a figure of merit of 2.0 W(-1/2) at the millimeter wave frequencies of 36-37 GHz based on guest-host type of second-order nonlinear polymer SEO125. CSR was improved more than 20 dB by using a SiO(2) protection layer. We demon...