An organic solar cell based on a poly-3-hexylthiophene (P3HT): phenyl-C61-butyric acid (PCBM) bulk hetero-junction was directly coupled with molybdenum sulfide resulting in the design of a new type of photocathode for the production of hydrogen. Both the light-harvesting system and the catalyst were deposited by low-cost solution-processed methods, i.e. spin coating and spray coating respective...

Cold spraying is a coating process which enables production of metallic and metallic ceramic coatings with dense (very low porosity level) and pure (low oxygen content) structures. Several coating applications such as corrosion resistance and electrical conductivity rely on these properties. Generally, cold spraying is based on higher particle velocities and lower process temperatures than othe...

The bone response to different plasma-spray and magnetron-sputter calcium phosphate (Ca-P)-coated implants was evaluated in a rabbit animal model. Four types of Ca-P coatings have been investigated: a plasma-spray Ca-P coating (HA-PS), a heat-treated plasma-spray Ca-P coating (HA-PS/ht), an amorphous magnetron-sputter coating (Ca-P-a), and a crystalline magnetron-sputter coating (CA-P-c). Seven...

Vertical carbon nanotube (CNT) forests bonded at room temperature with sprayed on nanoscale polymer coatings are found by measurement to produce thermal resistances that are on a par with those of conventional metallic solders. These results are achieved by reducing the high contact resistance at CNT tips, which has hindered the development of high performance thermal interface materials based ...

Y-junction carbon nanocoils (Y-CNCs) were synthesized by thermal chemical vapor deposition using Ni catalyst prepared by spray-coating method. According to the emerging morphologies of Y-CNCs, several growth models were advanced to elucidate their formation mechanisms. Regarding the Y-CNCs without metal catalyst in the Y-junctions, fusing of contiguous CNCs and a tip-growth mechanism are consid...

Microencapsulation of substances applied on textiles is a relatively new method with many advantages applied in many different fi elds. There are many effective approaches to microencapsulation for decreasing release of fragrances and active substances such as essential oils and cosmetic ingredients using cyclodextrins, yeast cells, chitosans, melamine-formaldehyde or poly(L-lactide) as wall ma...

Na3V2(PO4)3 (NVP) has been considered as a very promising cathodematerial for sodium-ion batteries (SIBs) due to its typical NASICON structure, which provides an open and three dimensional (3D) framework for Na migration. However, the low electronic conductivity of NVP limits its rate capability and cycling ability. In this study, carbon coated hollow structured NVP/C composites are synthesized...

Nickel oxide (NiO) thin films were prepared by nebulized spray pyrolysis (NSP) technique. The films are having more uniform thickness and there is no pinhole. Nickel oxide thin films have been deposited using 0.3M aqueous solution of nickel chloride NiCl2.6H2O onto microscopic glass substrates, which were chemically and ultrasonically cleaned before coating. The film depositions are carried out...

In view of the worldwide energy challenge in the 21(st) century, the technology of semiconductor-based photoelectrochemical (PEC) water splitting has received considerable attention as an alternative approach for solar energy harvesting and storage. Two-dimensional (2D) structures such as nanosheets have the potential to tap the solar energy by unlocking the functional properties at the nanosca...