In this paper the load optimization of a combined cycle power plant under consideration of the real cost of lifetime usage is accomplished by exploiting hybrid systems, i.e., systems evolving according to continuous dynamics, discrete dynamics, and logic rules. The possibility of turning on/off the gas and steam turbines, the operating constraints (minimum up and down times) and the different t...

Most electric power is produced by steam turbines. This is because the steam cycle is well suited to the conversion of heat to work and steam turbines can be built in a wide range of capacities up to about 1500 MW. Steam turbines are basically very simple having fixed blades to accelerate the steam and moving blades to absorb the resulting kinetic energy. The moving blades are mounted on a rota...

A reliability model for a power generating system comprising two gas turbines and one steam turbine is developed wherein scheduled inspection is done at regular interval of time for maintenance. Initially, all the three units i.e. two gas turbines as well as one the steam turbine are operating and working of the system is called the working at full capacity. On failure of one of the gas turbine...

Design of a natural dry cooling tower has been accomplished in two sections: the design of heat exchangers and the numerical solution of flow through the tower. Heat exchanger (Heller type) has been simulated thermodynamically and then coupled with a computer program, which calculated the turbulent natural convection flow through the tower. The computer program developed for this purpose can be...

A process integration model is developed based on mixed integer linear programming. The analysis is carried out using the reMIND software in combination with the commercial optimization software CPLEX. The steam production (heat recovery boiler, bark boiler and steam turbines) and the process steam consumers (digester, evaporation plant, bleaching plant as well as pulp dry machine and paper mak...

For many years, the Department of Power Engineering and Turbomachinery Silesian University Technology has been using a small-capacity (about 500 kW e ) steam-gas power plant. Based on years experience in operation this plant utilizing Velox-type gas-steam system, an idea arose to modify type thermal cycle create combined heat (CHP) small capacity, dedicated for distributed production or process...

This Steam System Survey Guide provides technical information for steam system operational personnel and plant energy managers on some of the major opportunities available to improve the energy efficiency and productivity of industrial steam systems. The guide covers five main areas of investigation: (1) profiling a steam system, (2) identifying steam properties for the steam system, (3) improv...

After the nuclear accidents of Three Mile Island and Chernobyl the world nuclear community made great efforts to increase research on nuclear reactors and to develop advanced nuclear power plants with much improved safety features. Following the successful construction and a most gratifying operation of the 10MWth high-temperature gas-cooled test reactor (HTR-10), the Institute of Nuclear and N...

Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. SUMMARY Poor control of steam generator water level of a nuclear power plant may lead to frequent nuclear reactor shutdowns. These shutdowns are more common at low power where the plant exhibits strong non-minimum p...

Conversion of water into steam is the primary function of a utility boiler. The steam pressure is used to turn a steam turbine thus, generating electricity. Within the boiler drum there exists a steam/water interface. Boiler steam drum water level is one of the important parameters of power plant that must be measured and controlled. For safe and efficient boiler operation, a constant level of ...