The use of Fiber Reinforced Polymer (FRP) reinforcement is a practical alternative to conventional steel rebars in concrete structures subjected to aggressive environments. The solution is attractive for bridge deck and rail applications, as it eliminates corrosion of the steel reinforcement, which is the major instrument of degradation. Due to the peculiar physical and mechanical characteristi...

Iron chromium oxide microspheres were generated by pulsed laser irradiation on the surface of two commercial samples of stainless steel at room temperature. An Ytterbium pulsed fiber laser was used for this purpose. Raman spectroscopy was used for the characterization of the microspheres, whose size was found to be about 0.2-1.7 μm, as revealed by SEM analysis. The laser irradiation on the surf...

Carbon fiber reinforced polymers strengthen steel structural elements. These structural elements are normally subjected to static, dynamic and fatigue loadings during their life-time. CFRP laminate is commonly used structures under the subjected loads. A number of focused on the characteristics of CFRP sheets members under static, dynamic and fatigue loadings. is a gap in understanding the bond...

Several efforts were made over the years to control vibration of structural components made of composite materials. This paper consists of study on effect of using shape memory alloy (SMA) to increase the damping of glass fiber reinforced plastic (GFRP) composites. A comparative study between SMA and steel was made as reinforcement material in GFRP composites to enhance damping. Dimensions of e...

Anodes of 304 stainless steel have been processed by a continuous wave Yb fiber laser with a wavelength of 1.064 lm and subjected to 50 keV electron bombardment in order to determine the extent to which hydrogen outgassing is reduced by the laser surface melting treatment. The results show a reduction in outgassing, by approximately a factor of four compared to that from untreated stainless ste...

This experimental investigation is to study the effects of replacement of cement (by weight) with five percentage of fly ash and the effects of addition of steel fiber composite. A control mixture of proportions 1:1:49:1.79 with w/c of 0.45 was designed. Cement was replaced with five percentages (10%, 15%, 20%, 25% & 30%) of Class C fly ash. Four percentages of steel fibers (0.15%, 0.30%, 0.45%...

This paper presents research documenting the local damage progression in rectangular concrete-filled steel tube beam-columns and connections in composite frames. Local damage is quantified through the development of damage indices based upon results of worldwide experiments. A fiber-based finite element formulation is also introduced for assessing global capacity and seismic demand.

In this paper, the fractal dimensions are proposed for characterizing the optical fiber corrosion sensors, which is applied to measure the steel corrosion based on Fe-C alloy film. Because corrosion was a complex random phenomenon and the corrosion surface of Fe-C alloy film of the optical fiber corrosion sensor possessed fractal characteristics, the image fractal dimensions is as a quantitativ...

A Paper for the World Wise Conference 1999 Winnipeg, Manitoba © November 15, 1999 Introduction Joints are used in concrete pavements in order to control cracking due to thermal and environmental conditions. Dowels span joints to transfer load from one slab to an adjacent slab and to provide vertical and horizontal alignment. Currently, smooth epoxy coated steel dowels are placed across transver...

The results obtained from nonlinear fiber element analyses for concrete filled tubes (CFT) are discussed. The studies were aimed at assessing primarily the overall behavior and stability effects on these structural elements as a prelude to a large full-scale testing program. The study focuses on ultimate strength analyses for CFT composite columns with different stress-strain models for both co...