نتایج جستجو برای: strain energy density factor
تعداد نتایج: 1985883 فیلتر نتایج به سال:
The fatigue cracks are observed in asphalt surfaces much more than ruts. This paper deals with the influence of carbon nano-tube on the fatigue life of asphalt mixtures. These samples are made up of the slabs cut by the asphalt cutting saw. Fatigue beams contain 0, 0.3, 0.6, 0.9, 1.2, and 1.5 percent of Carbon Nano-tube. The fatigue experiment was conducted using a 4-point semi-sinusoidal loadi...
In this paper a new method to determine the fracture properties and strain energy release rate for Carbon- Polyester composite has been introduced. Fracture characteristics such as critical stress intensity factor and critical strain energy release rate for mode I, mode II and mixed mode loading were determined using Arcan type specimen. 130 layers of carbon fiber polyester woven composite wit...
Mechanics of CNT-reinforced nano-cellular PMMA nanocomposites are investigated using coarse-grained molecular dynamics simulations. Firstly, static uniaxial stretching of bulk PMMA polymer is simulated and the results are compared with literature. Then, nano-cellular foams with different relative densities are constructed and subjected to static uniaxial stretching and obtained stress-strain cu...
because of inhomogeneity and anisotropy of composite materials, defining a unique fatigue criterion to be suitable for different loading conditions is much more difficult in comparison with traditional materials. for this reason many tests on evaluating the damages such as crack density, stiffness reduction and residual strength are used by various researchers to monitor the fatigue process. in...
The purpose of this investigation was to learn what part of the carotid sinus baroreceptor response is attributable to the gross mechanical properties of the wall and what part to the receptor elements. Static pressure forcings were applied to an isolated dog carotid sinus preparation while baroreceptor nerve activity was recorded; carotid sinus deformation was measured from still photographs t...
This study compares the capability of two different mathematical forms of the so-called softening variable to describe strain-induced stress softening observed within cyclic uniaxial tension of the human thoracic aorta. Specifically, the softening variable, which serves as the stress reduction factor, was considered to be tangent hyperbolic-based and error function-based. The mechanical respons...
biomechanical properties of soft tissue, such as liver, are important in modeling computer aided surgical procedures. experimental evidences show that liver tissue is transversely isotropic. in this article, considering the liver tissue as an incompressible fiber-reinforced composite with one family of fibers, an exponential strain energy function (sef) is proposed. the proposed sef is based on...
In this research, the hot deformation behavior of W360 tool steel was investigated using hot compression test at 1000-1200°C and strain rates of 0.001, 0.01, 0.1, and 1 s-1. According to the results, dynamic recrystallization was found the most important restoration factor of this alloy during hot deformation. Recrystallization was enhanced with an increase in temperature and strain rate. Also,...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید