Recent experimental research indicates that superelastic shape memory alloy nickel–titanium (NiTi) is superior to stainless steel against wear and could be applied in tribological engineering. It is believed that the super wear resistance of shape memory alloys is mainly due to the recovery of the superelastic deformation. Our recent wear study indicates that wear rate is very sensitive to the ...

In order to apply Ni-Ti superelastic alloy to wire clasp in dentistry, the bending characteristics and the shape memory treatment of the wire were investigated. The wire cooled in iced water was more easily bent than that stored at room temperature . In both conditions, however, most of the wire specimens were broken by bending before the radius of curvature became less than three times the dia...

In this work, the influence of crystallographic texture on mechanical properties was investigated by X-ray diffraction in the superelastic Ti-24Nb-4Zr-8Sn alloy. Different textures were obtained by changing the cold rolling reduction rate and the following thermal treatment (solution treatment or flash thermal treatment). The tensile tests performed show that Young’s modulus, elongation at rupt...

For Micro-electro-mechanical System (MEMS) applications, TiNi-based thin film Shape Memory Alloys (SMAs) possess many desirable properties, such as high power density, large transformation stress and strain upon heating and cooling, superelasticity and biocompatibility. In this paper, recent development in TiNi-based thin film SMA and microactuator Thin film SMAs and microactuators 209 applicat...

Mechanical abrasion is a phenomenon which commonly occurs during the application of polarmolecular electrorheological (PMER) fluids. We experimentally investigate its effect by milling PMER particles for different times. We find that this effect can significantly reduce electrorheological effects of PMER fluids made of butyrolactone-modified TiO2 particles. This reduction results from the reduc...

NiTi wires were brazed together via eutectic reaction between NiTi and Nb powder deposited at the wire contact region. Phase transformation and deformation behavior of the NiTi-Nb eutectic microstructure were investigated using transmission electron microscopy (TEM) and cyclic loading-unloading tests. Results show that R phase and B19' martensite transformation are induced by plastic deformatio...

The nickel-titanium (Ni-Ti) alloys used in endodontics contain 56% Ni and 44% Ti. The 2 unique features related to clinical dentistry (i.e., shape memory effect and superelasticity) are due to the transition from austenite to martensite in Ni-Ti alloy. When a superelastic Ni-Ti alloy undergoes a low tensile loading, normal elastic behavior occurs. In fact, at higher tensile loads, the elastic s...