In this article, the effect of parameters like working gap, work piece rotational speed and material removal mechanism(injection of the SiC Abrasive slurry and Al2O3, use of diamond paste as abrasive tool) in Magnetic Abrasive Finishing process using designing of experiments on the external surface of Cylindrical work pieces of Stainless steel AISI 440C to get minimum surf...

In this article, the effect of parameters like working gap, work piece rotational speed and material removal mechanism(injection of the SiC Abrasive slurry and Al2O3, use of diamond paste as abrasive tool) in Magnetic Abrasive Finishing process using designing of experiments on the external surface of Cylindrical work pieces of Stainless steel AISI 440C to get minimum surf...

In magnetic abrasive finishing (MAF), abrasive grains as a tool move on surface and can remove chip from surface of work piece. In this study AL 6061 tube was considered as the work piece and the effect of finishing parameters such as gap distance between tube and poles, rotational speed of tube, abrasive ration and finishing time on surface roughness was investigated. The mixture of ferromagne...

In magnetic abrasive finishing (MAF), abrasive grains as a tool move on surface and can remove chip from surface of work piece. In this study AL 6061 tube was considered as the work piece and the effect of finishing parameters such as gap distance between tube and poles, rotational speed of tube, abrasive ration and finishing time on surface roughness was investigated. The mixture of ferromagne...

The authors use a coupled atmosphere-ocean-wave model (SWAN) to simulate winds in a particular region on the continental shelf in the Mediterranean Sea. After showing that the model does a good job in reproducing the observed wind and wave patters, the authors use different parameterizations for the atmospheric bottom roughness length: in one case it depends on wind intensity ("uncoupled" simul...

abstract background and aim: one of the major problems with resin composite restorations is the weakness of bonding between the new and aged composites. since appropriate micromechanical retention is necessary for the repair of aged resin composite restorations, the level of surface roughness after sandblasting can be influential in this regard. considering the diverse composition of available ...

this paper presents the findings of experimental investigations into the effects of cutting speed, feed rate, depth of cut and approach angle on the machinability of titanium (grade-5) alloy. also the comparison for the two different cutting materials inserts polycrystalline diamond (pcd) and cubic boron nitride (cbn) with similar tool geometry for similar machining parameters is also carried o...

The influence of surface roughness magnitude and direction on dry static friction coefficient between two similar steel samples has been studied through an experiment. A testing apparatus has been designed and fabricated to measure the friction coefficient for a few forms of surface asperity. According to the results of the experiments, dry friction coefficient is affected by both magnitude and...

Reaming is a common finishing process for improving the drilled holes surface quality. Choosing an appropriate finishing method in drilling process has a significant effect on the surface quality of holes and in decreasing the process total cost and time. In this study, four similar holes were drilled on the AISI 4340 workpiece with different two pair feed rates. The drilling process was perfor...