This paper espouses the application of orthogonal array experiment to solve a class of engineering optimization problems encountered in systems engineering and architecting. It also illustrates the applicability of orthogonal array experiment in systems engineering and architecting with two examples: verification and validation of the performance of a bandwidth allocation algorithm and architec...

this work presents an experimental investigation of the influence of the six important machining parameters (tool nose radius, tool rake angle, feed rate, cutting speed, cutting environment (dry, wet and cooled) and depth of cut) on surface roughness & material removal rate in the machining unidirectional glass fiber reinforced plastics (ud-gfrp) composite using carbide (k10) cutting tool durin...

To investigate the material removal characteristic of paste polishing, experimental investigations based on Taguchi method have been carried out. In the experiments, the dwell time was fixed 300 seconds and the bonnet position was 4. The four variable factors (precess angles, head speed, head pressure and tool offset) with 3 levels were chosen to design the orthogonal array. With the designed o...

We extend the notions of correlation-immune functions and resilient functions to functions over any nite alphabet endowed with the structure of an Abelian group. Thus we generalize the results of Gopalakrishnan and Stinson as we give an orthogonal array characterization and a Fourier transform characterization for resilient functions over any nite alphabet. This leads to a generalization of som...

Machining of medium Brass alloy is very difficult. There are a number of parameters like cutting speed, feed and depth of cut etc. which must be given consideration during the machining of medium Brass alloy. This study investigates the effects of process parameters on Material Removal Rate (MRR) in turning of C34000. The single response optimization problems i.e. optimization of MRR is solved ...

Some inequalities for the lower bound of the number of constraints in an orthogonal array of strength two are derived. A method of constructing balanced incomplete block designs is given which depends upon the existence of two such designs with the same block size. A large number of these designs with k c 4,5 and ~l are also given. Qualified requestors may obtain copies of this report from the ...

The generalized word length pattern of an orthogonal array allows a ranking of orthogonal arrays in terms of the generalized minimum aberration criterion (Xu and Wu [Ann. Statist. 29 (2001) 1066–1077]). We provide a statistical interpretation for the number of shortest words of an orthogonal array in terms of sums of R2 values (based on orthogonal coding) or sums of squared canonical correlatio...

If the number of runs in a (mixed-level) orthogonal array of strength 2 is specified, what numbers of levels and factors are possible? The collection of possible sets of parameters for orthogonal arrays with N runs has a natural lattice structure, induced by the “expansive replacement” construction method. In particular the dual atoms in this lattice are the most important parameter sets, since...

We propose a novel method for the construction of orthogonal arrays. The algorithm makes use of the Kronecker Product operator in association with unit column vectors to generate new orthogonal arrays from existing orthogonal arrays. The effectiveness of the proposed algorithm lies in the fact that it works well with any linear seed orthogonal array without imposing any constraints on the stren...