effects of plant roots on increasing soil shear strength depend on root tensile strength. thus, determination of root tensile strength can provide the necessary data for analyzing root-soil relations. tensile strength of plant roots varied in a wide range and have been reported from thousands to millions of mpa. the main objective of this study was to assess inter-species variations of root ten...

failure of soft liners depends mostly on separation from the denture base resin; therefore measurement of the bond strength is very important. the purpose of this study was to compare the tensile bond strength of two soft liners (acropars, molloplast-b) to denture base resin before and after thermocycling.twenty specimens fromeach of the two different soft liners were processed according to the...

polymethyl methacrylate (pmma), widely used as a prosthodontic base, has many disadvantages, including a high thermal expansion coefficient and low thermal conductivity, a low elasticity coefficient, low impact strength and low resistance to fatigue. this study aimed to make an in vitro comparison of the thermal conductivity, compressive strength, and tensile strength of the acrylic base of com...

The influence of laser processing parameters on mechanical properties and microstructure of pure titanium models made by selective laser melting is investigated. The density of the models can reach higher than 95% under proper conditions. Although the tensile strength test shows results comparable to the wrought material, the impact and torsional fatigue strengths are low because of porosity an...

By using the mechanical property tester, conductivity tester, DSC and optical microscope, the effects of the solid solution temperature, water temperature, transfer time and delay time of quenching on the mechanical properties and conductivity of 7475 alloy were investigated, respectively. The results showed that all properties are satisfied at the solid solution temperature of 460°C­480°C whil...

In this paper, the flexural behavior of High-performance Fiber-Reinforced Cementitious Composite (HPFRCC) has been investigated, especially focusing on the localization of cracks, which significantly governs the flexural behavior of HPFRCC members. From four points bending tests with HPFRCC members, it was observed that almost evenly distributed cracks formed gradually, followed by a localized ...

Increasing of strain rate during forming of semi products or products is one of the ways of production intensification. Therefore an attention is paid to the study of the influence of the strain rate on the material behaviour in the deformation process, but also on the methodology of evaluation of formability at increased strain rates (including impact) 1,2 . In general, it applies that increas...

The introduction of femtosecond laser assisted cataract surgery (FLACS) is a paradigm changing approach in cataract surgery, the most commonly performed surgical procedure. FLACS has the potential to optimize the creation of an anterior lens capsulotomy, a critical step in accessing the cataractous lens. The merits of using a laser instead of a manual approach include a potentially more circula...

In order to expand the application range of laser welding and improve weld quality, an extra pulse current was used to aid laser-welded 2219 aluminum alloy, and the effects of pulse current parameters on the weld microstructure and mechanical properties were investigated. The effect mechanisms of the pulse current interactions with the weld pool were evaluated. The results indicated that the co...

Using density functional theory calculations, we have investigated the effects of biaxial tensile strain on the electronic and magnetic properties of partially hydrogenated graphene (PHG) structures. Our study demonstrates that PHG configuration with hexagon vacancies is more energetically favorable than several other types of PHG configurations. In addition, an appropriate biaxial tensile stra...