The influence of nanopore shapes on the electronic thermal conductivity (ETC) was studied in this paper. It turns out that with same porosity, the ETC will be quite different for different nanopore shapes, caused by the different channel width for different nanopore shapes. With same channel width, the influence of different nanopore shapes can be approximately omitted if the nanopore is small ...

Due to the numerous applications of nanofluids, investigating and understanding of thermophysical properties of nanofluids has currently become one of the core issues. Although numerous theoretical and numerical models have been developed by previous researchers to understand the mechanism of enhanced heat transfer in nanofluids; to the best of our knowledge these models were limited to the stu...

A theoretical model for describing effective thermal conductivity (ETC) of nanocrystalline materials has been proposed, so that the ETC can be easily obtained from its grain size, single crystal thermal conductivity, single crystal phonon mean free path (PMFP), and the Kaptiza thermal resistance. In addition, the relative importance between grain boundaries (GBs) and size effects on the ETC of ...

A thermal bridge is a part of the building envelope where the otherwise uniform thermal resistance is significantly changed by: • Full or partial penetration of the building envelope by materials with a different thermal conductivity and/or • A change in thickness of the structure and/or • A difference between internal and external areas, such as occur at wall-floor-ceiling junctions. INTRODUCT...

This study examines the influence of radial thickness on the thermal conductivity of thin metallic wires. While size effects on the electrical conductivity of thin wires have been discussed in the literature, research into size effects on thermal conductivity still requires investigation. At such small length scales, the assumption that the reduced electrical conductivity can be simply related ...

A critical synthesis of the variants within the thermophysical properties of nanofluids is presented in this work. The experimental results for the effective thermal conductivity and viscosity reported by several authors are in disagreement. Theoretical and experimental studies are essential to clarify the discrepancies in the results and in proper understanding of heat transfer enhancement cha...

The aim of this work is to determine the thermal conductivity of mesoporous silicon (PoSi) by fitting the experimental results with simulated ones. The electrothermal response (resistance versus applied current) of differently designed test lines integrated onto PoSi/silicon substrates and the bulk were compared to the simulations. The PoSi thermal conductivity was the single parameter used to ...

In this experiment, κ, the thermal conductivity of a rod of brass, was measured by periodically heating one end of the rod. Turning the heater attached to the rod on and off with a 10 mHz square wave signal, waves of heat were sent along the length of the rod, measured by two thermistors a distance ∆x apart. Taking these temperatures as a function of time, a Fourier transform was applied to a 1...

This paper presents a PC-based thermal cycler with a local-host architecture, where a PC is employed as the host. The local system only executes the thermal cycling process and the PC is responsible for the management of PCR protocols with a convenient GUI. The presented local-host system greatly reduces the development time and the maintenance cost, providing an economical PCR thermal cycler.

The capability of a miniaturized probe to measure local cerebral blood flow in a continuous and quantitative manner is described. The incorporation of thermal conductivity measurements using the isothermal principle with the hydrogen clearance method allows calibration of the thermal conductivity component in absolute terms. Evaluation of this system in 14 cats showed a linear relationship betw...