The decay resistance of oil-heat treated aspen wood (Populus tremula l.) against white rot fungi (Coriolus versicolor) and brown rot fungi (Coniophora puteana) was investigated. Three different temperature stages and two time levels for oil heat treatment for the selection of optimum conditions were determined. Linseed oil as a heating medium was used. The mass loss of treated samples that were...

In this study, beech wood was treated in hot oil and in hot air to determine the differences in the effects of the two processes on the physical properties of the wood. Heat treatment was conducted at temperatures of 160, 190, and 220 °C for 2 h at atmospheric pressure. After the heat treatment, various properties of the wood, including mass increase in hot oil treatment (wt% gain), mass loss i...

Malaysia, especially the Borneo Island state of Sarawak, has a large variety of tropical wood species. In this study, selected raw tropical wood species namely Artocarpus Elasticus, Artocarpus Rigidus, Xylopia spp., Koompassia Malaccensis, and Eugenia spp. were chemically treated with sodium metaperiodate to convert them into plasticized wood (PW). Manufactured plasticized wood samples were cha...

Chromated copper arsenate-treated (cca) wood disposal faces environmental restrictions due to its toxicity, heavy metal leaching in storage sites, and greenhouse gas emissions during incineration. Thus, finding new management methods for this contaminated at the end of life is crucial. This study evaluated effect pyrolysis temperature (300, 400, 500 °C), particle size, biochar yield, behavior a...

This study was conducted to evaluate the dermal absorption of arsenic from residues present on the surface of wood preserved with chromated copper arsenate (CCA). The research reported herein used methods parallel to those of earlier research on the dermal absorption of radiolabeled arsenic (R. C. Wester et al., 1993, Fund. Appl. Toxicol. 20, 336-340), with modifications to allow use of environ...

In the next ten years the amounts of waste wood impregnated with Cu, Cr and As (CCA) is expected to increase dramatically world wide. CCA has been widely used for wood preservation since the early 1950s and because the fixation of CCA in the wood is good, the concentration of CCA is still high, when the wood is at the end of service. In some countries e.g. Denmark and Norway, the use of As for ...

Wood–polymer composites (WPCs) were prepared from poplar wood (P. ussuriensis Komarov) in a two-step procedure. Maleic anhydride (MAN) was first dissolved in acetone and impregnated into wood; this was followed by a heat process; and then, glycidyl methacrylate (GMA) and styrene (St) were further impregnated into the MAN-treated wood, followed by a second thermal treatment. Finally, the novel W...

Bio-based wood materials are preferable for composites because of their sustainability, but adequately dispersing fibers in polymers can be difficult and costly. Our approach was to pretreat the with a green solvent system, allowing composite extruded single step, simplifying process, reducing overall cost. This study investigates fibrillation untreated sawdust (W) deep eutectic solvent-treated...

Wood has been successfully used as a bridge material for thousands of years, but before the early 1900’s most structures were built of untreated timber. Protection from decay and deterioration was afforded by using the heartwood of naturally durable species or by covering the structure to protect it from weathering. Although many bridges constructed of un­ treated timber performed well (some la...

Thermal modifications tend to darken wood color and enhance dimensional stability, erosion resistance, weather resistance, and product value. To investigate the chemical characteristics of VOCs influenced by the heat treatment process, air-dried poplar wood was heat-treated at four treatment temperatures (160,180, 200, and 220 °C) for 2 h. Near-infrared spectroscopy (NIR) was used to investigat...