As an important problem in forging factories, dies are destroyed because of high wear rate, plastic deformation and thermal and mechanical fatigue at high temperatures. This paper is an investigation into        the use of nickel super alloy with different welding parameters. Three weld overlaid alloys of inconel625, as wear resistance hardfacing materials on H13 tool steel, with different weld...

Variability in the magnitude of the impaction force applied by surgeons to assemble a hip prosthetic head to a femoral stem could be a cause of increased wear in taper junctions. This study investigates the effect of varying the magnitude of the assembly force on fretting wear at the taper over a 10 year period using a 3D finite element model and wear algorithm. It is demonstrated that an incre...

The importance of wear particle characterization for orthopaedic implants has long been established in the hip and knee arthroplasty literature. With the increasing use of motion preservation implants in the spine, the characterization of wear debris, particularly metallic nature, is gaining importance. An accurate morphological analysis of wear particles provides for both a complete characteri...

In this article, MC nylon/carbon nano tubes (CNTs) composites were prepared by in-situ polymerization method. The friction and wear properties were determined. The sample wear surface morphology carried out by scanning electron microscope (SEM) and the wear mechanism was investigated. It was found that the friction coefficient of composites has decreased with the amount of CNTs increasing in th...

The wear properties of biomaterials have been demonstrated to have a high importance within orthopedic bearing surfaces. This study performed a comparison of the wear between the two main grades of Ultra High Molecular Weight Polyethylene types GUR 1020 and GUR 1050 articulating against Cobalt Chromium. Such a high capacity wear comparison has not been reported elsewhere in the scientific liter...

The wear behavior of cutting tools directly affects the quality of the machined part. The measurement and evaluation of wear is a time consuming process and is subjective. Therefore, an image-based wear measurement that can be computed automatically based on given image series of cutting tools and an objective way to review the resulting wear is presented in this paper. The presented method fol...

Ultra-high molecular weight polyethylene (UHMWPE) wear in total knee arthroplasty (TKA) components is one of the main reasons of the failure of implants and the consequent necessity of a revision procedure. Experimental wear tests are commonly used to quantify polyethylene wear in an implant, but these procedures are quite expensive and time consuming. On the other hand, numerical models could ...

Every contacting surface inevitably experiences wear. Predicting the exact amount of material loss due to wear relies on empirical data and cannot be obtained from any physical model. Here, we analyze and quantify wear at the most fundamental level, i.e., wear debris particles. Our simulations show that the asperity junction size dictates the debris volume, revealing the origins of the long-sta...

350 The excessive differential wear of teeth and restorative materials has significant deleterious effects on the biologic, functional, and esthetic condition of the masticatory system. However, controlled investigations of numerous factors that might influence tooth and restoration wear have been mainly laboratory studies, the findings of which might not correlate with either the physical prop...