The paper analyzes the components of cam profile a camshaft an internal combustion engine. authors developed method calculating width and area contact, as well degree slippage occurring in friction pair consisting tappet sleeve, resistance to wear profile, depending on roughness surfaces working lubricating medium. Studying parts shows that uneven occurs along its surface. values parameters aff...

In this work, homogeneous thermochemical co-precipitation method was used to fabricate W-25wt%Cu nanocomposite. Synthesized nanocomposite powder was calcined and reduced. A hydrogen atmosphere sintering at 1200oC for 105 consolidated the product up to a density close to 98% theoretical density. Wear experiment were carried out using a pin-ondisc set up at three normal loads of 5, 10 and 15 N an...

In this work, homogeneous thermochemical co-precipitation method was used to fabricate W-25wt%Cu nanocomposite. Synthesized nanocomposite powder was calcined and reduced. A hydrogen atmosphere sintering at 1200oC for 105 consolidated the product up to a density close to 98% theoretical density. Wear experiment were carried out using a pin-ondisc set up at three normal loads of 5, 10 and 15 N an...

Previous reports have described the differences in the friction and wear behavior between different zones of human teeth. The objective of this research was to study the friction and wear behavior of human teeth under different wear conditions to extend the understanding of the tooth wear process, as well as to provide a more rational explanation for wear mechanism of teeth. Two typical wear te...

Theoretical and experimental investigation of wear during coupling in internal gears coated with various polymeric coating materials was performed in this study. In the theoretical part of the study, Archards’ wear formulation was adapted to internal gears and wear behavior in various conditions was determined. Moreover, a fatigue and wear testing apparatus having similar working principle with...

Impact wear can be defined as the wear of a solid surface that is due to percussion, which is a repetitive exposure to dynamic contact by another solid body. It generally has the devastating effects on the mechanical elements and causes the equipments to shift away from their normal performance. Impact wear has not been studied as extensive as other wear mechanisms and as a result information o...

In this study the effect of Al–5Ti–1B grain refiner on the structural characteristics and wear properties of Al–12Zn–3Mg–2.5Cu alloy was investigated. The optimum amount for Ti containing grain refiners was selected as 2 wt.%. T6 heat treatment, (i.e. heating at 460 °C for 1 h before water quenching to room temperature and then aging at 120 °C for 24 h) was applied for all specimens before wear...