This paper investigates the effects of process parameters on weld bead width of austenitic stainless steel SS-310 in tungsten inert gas welding. The four parameters namely welding current, type of gas, gas flow rate and included angle of weld plates during butt joint were varied at three levels. The DOE approach was used to design experimental conditions. Orthogonal array L9 was used for carryi...

Electron beam butt welding of stainless steel (SS 304) and electrolytically tough pitched (ETP) copper plates was carried out according to central composite design of experiments. Three input parameters, namely accelerating voltage, beam current and weld speed were considered in the butt welding experiments of dissimilar metals. The weld-bead parameters, such as bead width and depth of penetrat...

Associated to the weld quality, the weld bead geometry is one of the most important parameters in welding processes. It is a significant requirement in a welding project, especially in automatic welding systems where a specific width, height, or penetration of weld bead is needed. This paper presents a novel technique for real-time measuring of the width and height of weld beads in gas metal ar...

The present paper describes fuzzy logic simulation of tungsten inert gas welding (TIG) process to predict the weldment macrostructure zones' shape profile characteristics. The prediction of the weld pool geometry together with the shape of the heat affected zone (HAZ) was accomplished taking into account of TIG welding process parameters such as arc traverse speed, welding current and arc lengt...

A skilled welder determines the weld joint penetration from his/her observation of the weld pool surface during the welding process. This paper addresses the characterization of the 3D weld pool surface in gas tungsten arc welding (GTAW), i.e., extracting a set of characteristic parameters from the 3D weld pool surface to determine the backside bead width that measures the degree of weld joint ...

The objective of this research is to develop an experimental-theoretical analysis about the 11 influence of the cooling medium and the geometry of the welding bead profile in fatigue life and 12 associated parameters with structural integrity of welded joints. A welded joint with cruciform 13 geometry is considered using SMAW, plates in structural steel ASTM A36 HR of 8 mm of 14 thickness and E...

A three-dimensional mathematical model and numerical techniques were developed for simulating a moving gas metal arc welding process. The model is used to calculate the transient distributions of temperature and velocity in the weld pool and the dynamic shape of the weld pool for aluminum alloy 6005-T4. Corresponding experiments were conducted and in good agreement with modeling predictions. Th...

A detailed microstructural characterisation of the emerging weld-line grain structure, for bead-upon-plate welds in Ti-6Al-4V (Ti64) differing plate thickness, was performed. The microstructure studied formed during both steady state and non-steady sections within weld path, with portion being taken from end as bead heat source overhang edge plate. This allows effects welding process conditions...

Fillet welds are one of the most commonly used weld joints but one of the most difficult to weld consistently. This paper presents a technique using Artificial Neural Networks (ANN) to identify the key Gas Metal Arc Welding (GMAW) fillet weld parameters and interactions that impact on the resultant geometry, when using a metal cored wire. The input parameters to the model were current, voltage,...