The STM tunneling through a quantum wire (QW) with a side-attached impurity (atom, island) is investigated using a tight-binding model and the nonequilibrium Keldysh Green function method. The impurity can be coupled to one or more QW atoms. The presence of the impurity strongly modifies the local density of states of the wire atoms, thus influences the STM tunneling through all the wire atoms....

Optimal mechanisms are determined for the hierarchical decomposition of wire-frame surfaces generated by box splines. A family of box splines with compact support, suitable for the approximation of wire-frames is first defined, generated by arbitrary sampling matrices with integer eigenvalues. For each such box spline, the optimal positioning of the wire-frame nodes is determined for each level...

The metal-assisted chemical etching (MACE) was used to synthesis silicon nanowires. The effect of etchant concentration, etching and chemical plating time and doping density on silicon nanowires length were investigated. It is held that the increasing of HF and H2O2 concentrations lead to etching rate increment and formation of wire-like structure. The results show that, the appropriate ratio o...

High-frequency loss in transformer windings using stranded wire is analyzed. A complete loss prediction method is presented. The interstrand resistivity, which is an important parameter to determine the power loss, is measured experimentally. The analytical model is solved to get an optimal pitch, which specifies the degree of twisting that results in minimum loss. A transformer using a strande...

We report the investigation of vortex emission by a vibrating wire in superfluid 3He-B at a pressure of 28 bar. We used two vibrating wires with 47 Hz and 183 Hz resonance frequencies as a generator and a detector of vortices. The onset velocity of vortex emission for the 183 Hz vibrating wire is higher than a pair-breaking velocity, indicating that pair breaking causes vortex generation. In co...

This paper described the measurement of acoustic signal generated by partial discharge in insulation oil and analysis of their frequency spectrum to acquire information for diagnosing oil insulated transformers. We designed a decoupler and a low-noise amplifier to detect acoustic signals with high sensitivity. Also, three types of electrode system; the needle-plane, the plane-plane, the wire-wi...

In this paper, we present a fast algorithm for continuous wire-sizing under the distributed Elmore delay model. Our algorithm GWSA-C is an extension of the GWSA algorithm (for discrete wire-sizing) in CL93a]. GWSA-C is an iterative algorithm with guaranteed convergence to optimal wire-sizing solutions. When specialized to discrete wire-sizing problems, GWSA-C is an improved implementation of GW...

At the final stages of a coronary artery bypass graft operation on a 64-year-old man, an experienced physician attempted to insert an intra-aortic balloon pump into the femoral artery via the Seldinger technique. However, while the balloon pump was being passed over the guide wire, the latter was completely lost. The guide wire should be held at the tip at all times to prevent passage into the ...

Optimization of the wire sawing process of silicon ingots requires a profound understanding of the dynamic interaction of wire, slurry and silicon material. In this paper, the influence of wire velocity and applied wire stress on the process is investigated using dissipative particle dynamics and discrete element simulations for modelling the fluid and the grains in the abrasive suspension. In ...