The nonlocal nonlinear buckling of a double layer graphene sheet (DLGS) covered by zinc oxide (ZnO) piezoelectric layers is investigated in this study. The surrounding circumstances of the system are considered as a Pasternak foundation including spring constants and a shear layer. Graphene sheets are subjected to longitudinal magnetic field and biaxial forces. On the other hand, the ZnO piezoe...

Miniaturized accelerometers are necessary for evaluating the performance of small devices, such as haptics, robotics and simulators. In this study, we fabricated miniaturized accelerometers using well-aligned ZnO nanowires. The layer of ZnO nanowires is used for active piezoelectric layer of the accelerometer, and copper was chosen as a head mass. Seedless and refresh hydrothermal synthesis met...

In this study, we report a fully described modeling and simulation of a piezoelectric layered structure for surface acoustic wave (SAW) applications. SAW propagation characteristics were numerically investigated in ZnO/IDT/128° YX LiNbO3. The numerical analysis was conducted using Finite Element Method (FEM) in COMSOL Multiphysics 4.3b platform. The numerical results show that the electromechan...

We report the first piezoelectric potential gated hybrid field-effect transistors based on nanotubes and nanowires. The device consists of single-walled carbon nanotubes (SWNTs) on the bottom and crossed ZnO piezoelectric fine wire (PFW) on the top with an insulating layer between. Here, SWNTs serve as a carrier transport channel, and a single-crystal ZnO PFW acts as the power-free, contact-fre...

Recently, zinc oxide (ZnO) nanowires have drawn major interest because of their semiconducting nature and unique optical and piezoelectric properties. Various applications for ZnO nanowires have been conceived, including the next generation of field effect transistors, light emitting diodes, sensors and resonators. ZnO nanowires are also envisioned as nanogenerators by exploiting the coupling o...

A new type of ultraviolet (UV) light sensor based on film bulk acoustic wave resonator (FBAR) is proposed. The new sensor uses gold and a thin n-type ZnO layer deposited on the top of piezoelectric layer of FBAR to form a Schottky barrier. The Schottky barrier's capacitance can be changed with UV light, resulting in an enhanced shift in the entire FBAR's resonant frequency. The fabricated UV se...

We have investigated the effects of different p-type polymer layers on the piezoelectric potential from ZnO nanowire (NWs) grown on silver (Ag) coated silicon (Si) substrate by the low temperature chemical synthesis method. Piezoelectric measurement was done by a conductive atomic force microscope (AFM). In the case of the poly(3,4ethylenedioxythiophene-Tosylate (PEDOT-Tos), the output voltage ...

A hybrid nanowire (HNW) was constructed by coating a single-wall carbon nanotube (SWCNT) with piezoelectric zinc oxide (ZnO). The two components of the HNW interact with each other via the van der Waals (vdW) force. This paper aims to study the effect of the piezoelectricity in the ZnO layer and the inter-phase vdW interaction on the fundamental vibration of the HNWs. In doing this, a new model...

In this work, the dependence of piezoelectric coefficients (PE) on the size of artificial fabricated ZnO micropillars on Si substrate is investigated. ZnO full film is grown with c-axis orientation and an average grain size of 20 nm at a substrate temperature of 500 °C by pulsed laser ablation. The micropillars with the size range of 1.5 to 7 μm are formed by top-down semiconductor device proce...

As an outstanding member in the oxide nanowire family, ZnO nanowire is widely studied for its optical, semiconductive, and piezoelectric properties. PbZrxTi1–xO3 (PZT), usually in the form of polycrystalline thin films, is known for its high piezoelectric coefficient and is an ideal material as actuator. In this review, we first briefly introduce the rational growth of ZnO and PZT nanowire arra...