This paper presents the experimental observation of piezoelectric generation from a single ZnO wire/belt for illustrating a fundamental process of converting mechanical energy into electricity at nanoscale. By deflecting a wire/belt using a conductive atomic force microscope tip in contact mode, the energy is first created by the deflection force and stored by piezoelectric potential, and later...

Keeping the fact in mind that different morphologies have strong influence on piezoelectric properties, ZnO NNs were synthesized on textile for harvesting piezoelectricity. Piezoelectric potential was captured from ZnO NNs grown on textile by using AFM in contact mode. Structural study was carried out by using FESEM, HRTEM and XRD techniques. The recorded output potential and current was more t...

We reported ZnO nanorod-based piezoelectric nanogenerators (NGs) with Au-coated silica sphere array as an efficient top electrode. This electrode can readily bend the ZnO nanorods due to its enhanced surface roughness, thus resulting in more increased and regular piezoelectric charge output. Under a low external pushing force of 0.3 kgf, the output current and voltage were increased by approxim...

Piezotronics is a new field integrating piezoelectric effect into nanoelectronics, which has attracted much attention for the fundamental research and potential applications. In this paper, the piezotronic effect of zinc oxide (ZnO) nanowires, including the response of the electrical transport and photoconducting behaviors on the nanowire bending, has been investigated by in situ transmission e...

This paper presents the design and testing of a one-axis piezoelectric accelerometer made from cellulose paper and piezoelectric zinc oxide nanowires (ZnO NWs) hydrothermally grown on paper. The accelerometer adopts a cantilever-based configuration with two parallel cantilever beams attached with a paper proof mass. A piece of U-shaped, ZnO-NW-coated paper is attached on top of the parallel bea...

2014 Recent experiments have shown that interdigital transducers can couple strongly to plate modes in piezoelectric composite membranes. In this paper the dispersive properties and the piezoelectric coupling (039403BD/03BD) to these plate modes are presented The various types of modes are identified and related to crystalline symmetry. Results are given for stiffened-shear modes in zinc oxide ...

Piezoelectric coupling phenomena in a graphene field-effect transistor (GFET) with a nano-hybrid channel of chemical-vapor-deposited Gr (CVD Gr) and vertically aligned ZnO nanorods (NRs) under mechanical pressurization were investigated. Transfer characteristics of the hybrid channel GFET clearly indicated that the piezoelectric effect of ZnO NRs under static or dynamic pressure modulated the c...

Nanowires made of materials with noncentrosymmetric crystal structure are under investigation for their piezoelectric properties and suitability as building blocks for next-generation self-powered nanodevices. In this work, we investigate the size dependence of piezoelectric coefficients in nanowires of two such materials - zinc oxide and gallium nitride. Nanowires, oriented along their polar a...

Recently, a cellulose-based composite material with a thin ZnO nanolayer-namely, ZnO nanocoated cellulose film (ZONCE)-was fabricated to increase its piezoelectric charge constant. However, the fabrication method has limitations to its application in mass production. In this paper, a hydrothermal synthesis method suitable for the mass production of ZONCE (HZONCE) is proposed. A simple hydrother...

A self-powered gas sensor that can actively detect ethanol at room temperature has been realized from a Pt/ZnO nanoarray nanogenerator. Pt nanoparticles are uniformly distributed on the whole surface of ZnO nanowires. The piezoelectric output of Pt/ZnO nanoarrays can act not only as a power source, but also as a response signal to ethanol at room temperature. Upon exposure to dry air and 1500 p...