This paper presents the results of a study aimed at establishing the temperature distribution during the welding of magnesium alloy sheets by Pulsed Current Gas Tungsten Arc Welding (PCGTAW) and Constant Current Gas Tungsten Arc Welding (CCGTAW) processes. Pulsing of the GTAW welding current influences the dimensions and solidification rate of the fused zone, it also reduces the weld pool volum...

In this work, Concurrent Engineering (CE) approach has been used to determine the most optimum decision on design concept and material of the composite accelerator pedal at conceptual design stage. Comprehensive studies are carried out to prepare the design specifications of composite accelerator pedal. Various design concepts are generated using the Morphological approach. In particular at des...

The deposition stability and homogeneity of microparticles improved with mask, lengthened nozzle and flow rate adjustment. The microparticles can be used to encapsulate monomers, before the monomers in the microparticles can be deposited onto a substrate for nanoscale self-assembly. For the uniformity of the synthesized nanofilm, the homogeneity of the deposited microparticles becomes an import...

Here the theoretical maximum contact stress is calculated by Hertz equation. Also the finite element analysis of spur gear is done to determine the maximum contact stress by ANSYS 14.5. It was found that the results from both Hertz equation and Finite Element Analysis are comparable. From the deformation pattern of steel and grey cast iron, it could be concluded that difference between the maxi...

This research aims to simulate a gravity flow fractionation—the process to fractionate erythrocytes through gravitational field using ANSYS simulation software. A particular microfluidic channel was designed as a separation device. The gravitational equilibrium conditions of the erythrocytes and gravitational field as the parameters were chosen, then deriving the erythrocytes’ path through nume...

Recently new threats to humans are observed from electromagnetic radiation from various sources like mobile phones, transmission lines and many more. For providing continuous and uninterrupted supply of electric power to consumer’s maintenance operation of high voltage power lines are often performed with systems energized or live. This is referred as Hot Line maintenance or live line maintenan...

The active magnetic bearing (AMB) is an integral part of the industrial rotational machine. The paper deals with simulation study of three and four coil AMB utilizing Finite Element Method (FEM). This paper also presents how ANSYS software (Ver. 12.1) can be used to perform the magnetic field analysis in the AMB. This work reports ANSYS simulation for two different structure of AMB that uses th...

A four-leaf steel spring used in the rear suspension system of light vehicles is analyzed using ANSYS V5.4 software. The finite element results showing stresses and deflections verified the existing analytical and experimental solutions. Using the results of the steel leaf spring, a composite one made from fiberglass with epoxy resin is designed and optimized using ANSYS. Main consideration is ...

Dynamic excitation of any machine tool structure is based on natural frequency of the structure and corresponding mode shape. Initial work of the thesis presents a systematic procedure and details of the use of experimental analysis and finite element modal analysis technique for determining the structural dynamic response of end milling machine.The simplified experimental modal analysis of dif...

This Master’s Thesis compares two computational fluid dynamics solvers: the commercial solver ANSYS CFX and the open source code OpenFOAM. Simple benchmark cases with compressible and incompressible flows are tested and compared. Thereafter the more complex process of quenching in coal gasification is simulated. This thesis work describes the simulation of a part of the coal gasification proces...