Molecularly well-defined Ni sites at heterogeneous interfaces were derived from the incorporation of Ni2+ ions into heteroatom-doped graphene. The molecular Ni sites on graphene were redox-active. However, they showed poor activity toward oxygen evolution reaction (OER) in KOH aqueous solution. We demonstrated for the first time that the presence of Fe3+ ions in the solution could bond at the v...

The reaction of Fe(CO)(2)(NO)(2) and Ni(N(2)S(2)) (N(2)S(2) = N,N'-Bis(2-mercaptoethyl)-1,4-diazacycloheptane) by a single CO replacement yields [Ni(N(2)S(2))]Fe(NO)(2)(CO), while an excess of Fe(CO)(2)(NO)(2) leads to triply bridging thiolate sulphurs in a cluster of core composition Ni(2)S(4)Fe(3), lacking one Fe(NO)(2) unit to complete the adamantane-like structure. This structural type was ...

In order to investigate the efficiency of sulfate green rust (GR2) to remove Ni from solution, GR2 samples were synthesized under controlled laboratory conditions. Some GR2 samples were synthesized from Fe(II) and Fe(III) sulfate salts by precipitation. Other samples were prepared by coprecipitation, of Ni(II), Fe(II) and Fe(III) sulfate salts, i.e., in the presence of Ni. In another sample, Ni...

A thin film giant magneto impedance (GMI) based on magnetic field sensor has been developed using electrodeposited Ni-Fe permalloy. Chemical composition, surface morphology, and magnetic properties of Ni-Fe permalloy were characterized as a function of plateup parameters, and process conditions were established to deposit a Ni-Fe thin film with a high permeability (~1000) and a low coercivity (...

Safflorite, a naturally occurring cobalt-nickel-iron diarsenide (Co,Ni,Fe)As(2), possesses the marcasite-type structure, with cations (M = Co + Ni + Fe) at site symmetry 2/m and As anions at m. The MAs(6) octa-hedra share two edges, forming chains parallel to c. The chemical formula for safflorite should be expressed as (Co,Ni,Fe)As(2), rather than the end-member format CoAs(2), as its structur...

This article presents a set of low-temperature deposition and etching processes for the integration of electrochemically deposited Ni-Fe alloys in complex magnetic microelectromechanical systems, as Ni-Fe is known to suffer from detrimental stress development when subjected to excessive thermal loads. A selective etch process is reported which enables the copper seed layer used for electrodepos...

Ni-Fe/Si3N4 nanocomposite coatings with various ratio of Si3N4 to Na-saccharine were prepared by electrodeposition technique. The effect of Si3N4 nanoparticulates in the Ni-Fe nanocomposite coatings was investigated in relation to the ratio of Si3N4 to Na-saccharine in the plating bath. X-ray diffraction analysis showed that the Ni-Fe nanocomposite coating has face center cubic structure (FCC)....