F. Farhani
[ 1 ] - Effects of Some Parameters on Thermal Control of a LEO Satellite
Satellite thermal control ensures safe operating temperature ranges for satellite components throughout the mission life. Effects of altitude, spin, and position of satellite radiator(s) on the thermal control of a small Low Earth Orbit (LEO) satellite have been studied. Results show that change in satellite altitude, in the range considered here, does not produce critical thermal conditions. H...
[ 2 ] - بررسی تجربی استفاده از دیوارهای بادشکن برای افزایش دبی ورودی برج هلر تحت وزش باد
وزش باد، یکی از عوامل محیطی نامطلوب بر عملکرد حرارتی برجهای هلر میباشد. در این مطالعه تجربی، با استفاده از یک مدل همدمای برج هلر در تونل باد، تاثیر وجود دیوارهای بادشکن در بهبود دبی ورودی به برج در شرایط وزش باد بررسی گردیده است. دیوارهای بادشکن در ابعاد و زوایای مختلف در اطراف مدل نصب و کارایی آنها در چندین زاویه وزش باد مطالعه شده است. بر اساس نتایج، استفاده از دیوارهای بادشکن، تا 30 % دبی ور...
[ 3 ] - Study of Degradation of Dry Cooling Tower Performance under Wind Conditions and Method for Tower Efficiency Enhancement (RESEARCH NOTE)
Wind affects adversely the cooling tower thermal performance. A field investigation was carried out to study the thermal performance of Heller cooling towers under wind conditions, involving measurement of wind velocity and its direction around the cooling tower, and obtaining water flow rates and temperatures at the cooling tower inlet and outlet. Results show that air suction at the tower top...
[ 4 ] - Effect of Temperature on Electrical Parameters of Phosphorous Spin–on Diffusion of Polysilicon Solar Cells
Effects of temperature on electrical parameters of polysilicon solar cells, fabricated using the phosphorous spin-on diffusion technique, have been studied. The current density–voltagecharacteristics of polycrystalline silicon solar cells were measured in dark at different temperaturelevels. For this purpose, a diode equivalent model was used to obtain saturation current densi...
[ 5 ] - Proposing New Algorithm for Modeling of Regenerative Fuel Cell (RFC) System
Regenerative Fuel Cell (RFC) systems are used for the enhancement of sustainable energy aspect in conventional fuel cells. In this study, a photovoltaic-electrolyzer-fuel cell integrated cycle has been presented. The proposed system has been designed as a novel approach for alleviating the restrictions on energy streams in the RFC systems. Modeling of the system has been performed from the mas...
نویسندگان همکار