محمد حسن عباسی

استاد دانشکده مواد دانشگاه صنعتی اصفهان

[ 1 ] - اثر فعالسازی مکانیکی بر احیای کربوترمی مولیبدنیت درحضور اکسید منیزیم

در این پژوهش، اثر فعالسازی مکانیکی بر سینتیک احیای کربوترمی مولیبدنیت در حضور اکسیدمنیزیم مورد بررسی قرار گرفت. فعالسازی مکانیکی کلیه مخلوط های پودری(مخلوط مولیبدنیت،کربن و اکسیدمنیزیم به ترتیب با نسبت مولی 2:2:1 )، در یک آسیاب گلوله ای، در محیط گاز خنثی آرگون و برای مدت زمان‌های 10 تا50 ساعت، صورت گرفت. نتایج حاصل از آزمون پراش پرتو ایکس(XRD) کلیه نمونه‌ها، نشان داد که در حین فعالسازی مکانیکی،...

[ 2 ] - بررسی ترمودینامیکی احیای کربوترمی مولیبدنیت در حضور اکسید منیزیم

Carbothermic reduction of Molybdenite in the presence of Magnesium oxide was thermodynamically studied. The stability diagrams for MoS2-MgO and MoS2-MgO-C Systems was prepared. The reduction of MoS2 with Carbon in the presence of Magnesium oxide proceeded through the direct oxidation of MoS2 by MgO to form intermediate molybdenum oxidized Species, MoO2 and MgMoO4. The results showed that the g...

[ 3 ] - کلراسیون زیرکونیای آسیابکاری شده

The effects of mechanochemical treatment of monoclinic zirconia in high energy planetary ball mill on its phase transformation were investigated. The mechanical treatment in ball mill reduces the grain size, increases microstrain, and causes phase transition to metastable nanostructured tetragonal and cubic phases. XRD and TEM results show considerable amounts of amorphous phase during ball mil...

[ 4 ] - Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite

Mechanical alloying and vacuum sintering have been used to produce bulk nanostructured Ti5Si3 and Ti5Si3-15Wt.% Al2O3 nanocomposite. X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to study the microstructural characteristics of the samples. Indentation method was used to calculate hardness, elastic modulus and fracture toughness ...

[ 5 ] - Thermodynamic Investigation of Copper Removal From Liquid Slag.

The removal of copper dissolved in liquid stags by pyrometalIurgical means such as gaseous reduction and sulfidization is thermodynamically investigated. The lowest level possible for copper content is theoretically determined and compared. The results show that gaseous reduction is not as effective as sulfidization. Slags with very low levels of dissolved copper can be obtained with sulfide tr...

[ 6 ] - سینتیک احیای کربوترمی مولیبدنیت در حضور اکسید منیزیم

در این پژوهش، سینتیک احیای کربوترمی مولیبدنیت در حضور اکسیدمنیزیم مورد بررسی قرار گرفت. نمونه های پودری با نسبت استوکیومتری(مولیبدنیت: اکسیدمنیزیم: گرافیت 2:2:1) تهیه و تحت آزمون آنالیز حرارتی هم زمان (STA)، با سه نرخ حرارتی10، 15 و20 درجه بر دقیقه، قرار گرفتند. به منظور تعیین فازهای میانی تشکیل شده در طول فرآیند، یک سری آزمایش های هم دما تحت اتمسفر آرگون صورت گرفت. نتایج نشان داد که فرآیند در ...