PURPOSE The aim of this in vitro study was to examine the curing efficiency of various resin-based materials polymerized through ceramic restorations with 3 different thicknesses. Curing efficiency was evaluated by determining the surface microhardness (VHN) of the resin specimens. MATERIALS AND METHODS Four kinds of resin materials were used. Z350 (3M ESPE Filtek™ Z350: A2 Shade), Z250 (3M E...

OBJECTIVES (1) To synthesize 3mol% yttria-stabilized zirconia (3Y-TZP) powders via coprecipitation route, (2) to obtain zirconia ceramic specimens, analyze surface characteristics, and mechanical properties, and (3) to compare the processed material with three reinforced dental ceramics. METHODS A coprecipitation route was used to synthesize a 3mol% yttria-stabilized zirconia ceramic processe...

A preferred piezoelectric ceramic material is a BiFeO3—PbZrO3—PbTiO3 ternary solid solution wherein proportions of the constituent perovskite metal oxides are selected so that the material exhibits relatively high Curie temperatures above 380° C. and useful piezoelectric properties. Disciplines Ceramic Materials This patent is available at Iowa State University Digital Repository: http://lib.dr...

Introduction and Summary Over the past year, ISEN funding has been utilized to make significant research progress towards the fabrication of a fully 3D-printed iron/solid oxide fuel cell (Metallic/multi-ceramic) batterygenerator system (Figure 1). Monies have gone towards the partial funding of one grad student/postdoc, Adam Jakus, in Ramille Shah’s Tissue Engineering and Additive Manufacturing...

Complex ceramic and composite materials used in alternative energy technologies often present challenges during electron microscopy analysis. Bulk electrical properties such as transport and mobility are crucial factors in carbon based or nanomaterial composites often analyzed at the atomic or molecular level despite the presence of localized chemical composition and resultant phase transformat...

In this study, the effects of the color of different post-core materials and different colored cements on the color and esthetic of all-ceramic restorations were investigated. Three groups of post-cores (ceramic, Cr-Ni and Cr-Ni + opaque), one sample per each group, were prepared as discs 14 ± 0.05 mm in diameter and 1.5 ± 0.05 mm in thickness. A total of 40 cement samples, 10 per each group (o...

Thermal residual stresses exist within a body in the absence of external loading or thermal gradients. Processing of the composites often involves cooling from higher temperature resulting in thermal residual stresses in the matrix due to restraint imposed by reinforcements. Thermal residual stresses determinately affect the properties of materials thereby shortening their lifetime. These resid...

OBJECTIVES All ceramic restorations without metal have great advantages in their biocompatibility and aesthetic aspects. With the introduction of new core materials, the cores are sufficiently strong to produce long lasting all-ceramic restorations; however, the stresses in the veneering porcelain could still determine the longevity. The objective of this study was to evaluate, by finite elemen...

Digitalization has become part and parcel of contemporary prosthodontics with the probability of most of the procedures being based on the digital techniques in the near future. This digital revolution started in the latter half of the 20th century by converting analog objects/signals into digital bits and bytes. Recent developments in all-ceramic materials and systems of computer-aided designi...

The aim of this study was to investigate the effect of antagonist material and configuration on combined wear, which was produced by alternating toothbrush wear and simulated occlusal wear on one specimen. Worn volume and maximum worn depth comparisons were done using two antagonist materials (steel and ceramic) and two antagonist configurations (flat and round). For the material factor, worn v...