Time-of-flight secondary ion mass spectrometry and X-ray photoelectron spectroscopy were used to study the influence of ageing 2024 aluminium alloy at 190 °C on subsequent degreasing deoxidation behaviour. After aged alloy, an increase in surface Cu coverage a roughening observed as compared non-aged alloy. The enrichment affected growth mechanisms trivalent chromium process (TCP) coating. TCP ...

The purpose of this study was to examine how Co-Cr-Mo dental alloy behaves in the solutions of different pH value and different composition over a relatively long period of time. Co-Cr-Mo dental alloy was exposed in vitro to either simulated saliva (phosphate buffer pH 6.0), a highly acidic medium resembling the extreme conditions in the oral cavity (phosphate buffer pH 3.5), and in lactic acid...

A new, fourth generation, single crystal superalloy has been jointly developed by GE Aircraft Engines, Pratt & Whitney and NASA. The focus of the effort was to develop a turbine airfoil alloy with long-term durability for use in the High Speed Civil Transport. In order to achieve adequate long-time strength improvements at moderate temperatures and retain good microstructural stability, it was ...

The electrochemical behaviors of eight parent alloys and four post-solder alloys used in dental prostheses were specified in a (pH=7.4; [NaCl]=9g/L)-aqueous solution at 37°C. For each alloy, the free potential was followed during two hours, and a cyclic polarization between the cathodic domain and the solvent’s oxidation was performed. The galvanic corrosion between each parent alloy and its us...

AIM The aim of this study was to evaluate the effect of recasting base metal alloy on the metal-ceramic bond strength. MATERIALS AND METHODS A total of 60 test samples were prepared from new and recast nickel-chromium alloy and divided into six groups. In group A0, test samples were prepared from 100% new alloy. Groups A1, A2, A3, A4, and A5 were prepared from 50% new alloy and 50% casting re...

PURPOSE To compare the debonding/crack initiation strength (D/CIS) of a low-fusing pressable leucite-based glass ceramic (PC) fused to metal to a feldspathic porcelain (FP) fused to metal. MATERIALS & METHODS As per ISO 9693:1999, 40 rectangular metal specimens (25.0 mm x 0.5 mm x 3.0 mm) were prepared. Twenty of the specimens were cast in a base metal nickel-chromium alloy (BA), and 20 were ...

BACKGROUND Femoral stems with dual-taper modularity were introduced to allow additional options for hip-center restoration independent of femoral fixation in total hip arthroplasty. Despite the increasing availability and use of these femoral stems, concerns exist about potential complications arising from the modular neck-body junction. METHODS This was a multicenter retrospective case serie...