A novel cobalt-chromium (CoCr) based alloy, optimised for speciality needle applications, has been benchmarked against Type 304 stainless steel in a series of mechanical test and experimental needle trials. The results reported indicate that the CoCr alloy has the potential to overcome current limitations in endoscopic and minimally invasive surgery.

BACKGROUND The purpose of this study was to evaluate and compare the micro tensile bond strength of two metal bonding resin cements to sandblasted cobalt chromium alloy. MATERIALS & METHODS Eight, Cobalt chromium alloy blocks of dimensions 10x5x5 mm were cast, finished and polished. One of the faces of each alloy block measuring 5x5mm was sandblasted with 50 μm grit alumina particles. The all...

Metallic materials are the basis of dental materials science, which is an important part of dentistry. As a result of their good mechanical properties and some biological properties, metals are widely used in oral rehabilitation of dentition and mandibular defects, orthodontic and dental implants, as well as in the equipment for dental operations. Commonly used metals include nickel chromium, c...

OBJECTIVES A nondestructive, rapid, and practical method of dental alloy sorting is desirable. In this study, the hypothesis to be tested is that dental alloys show significantly different and high thermoelectric power values, on the basis of which alloy sorting is possible. METHODS Six silver-colored commercial dental casting alloys are used in this study: two silver alloys, one gold-silver-...

STATEMENT OF PROBLEM The poor chemical bonding of a denture base resin to cast titanium framework often introduces adhesive failure and increases microleakage. PURPOSE This study evaluated the shear bond strengths of a heat cure denture base resin to commercially pure titanium, Ti-6Al-4V alloy and a cobalt-chromium alloy using two adhesive primers. MATERIAL AND METHODS Disks of commercially...

OBJECTIVE The objective of this study was to clarify the influence of chromium content on surface reaction of Ti-Cr alloys in an acidic fluoride-containing saline solution. METHODS Four Ti-Cr alloys containing 5, 10, 15 or 20 mass% chromium were characterized in terms of dissolution of metals in an acidic fluoride-containing saline solution and surface structure by X-ray photoelectron spectro...

The development of materials which contain the noble metals for use in high temperature strain gauges is reviewed, with particular emphasis being placed upon work done by the Institute of Precious Metals, in China. Three alloy systems displaying excellent resistance to oxidation and good overall properties when used in high temperature straingauges, are singled out for examination. These are pl...

BACKGROUND Sandblasting particles which remain on the surfaces of dental restorations are removed prior to cementation. It is probable that adhesive strength between luting material and sandblasting particle remnants might exceed that with restorative material. If that being the case, blasting particles adhere to sandblasted material surface could be instrumental to increasing adhesive strength...

Some of the component metals of the alloys used for total joint prostheses are toxic and dissolve in the body fluids. It is important to establish how toxic these metals are and to assess the risk of localised tissue necrosis around the prostheses. This has been investigated by incubating primary monolayer cultures of human synovial fibroblasts with various preparations of metals for periods up...

We evaluated the concentrations of chromium and cobalt ions in blood after metal-on-metal surface replacement arthroplasty using a wrought-forged, high carbon content chromium-cobalt alloy implant in 64 patients. At one year, mean whole blood ion levels were 1.61 microg/L (0.4 to 5.5) for chromium and 0.67 microg/L (0.23 to 2.09) for cobalt. The pre-operative ion levels, component size, female ...