4D Printing of Recyclable Lightweight Architectures Using High Recovery Stress Shape Memory Polymer
نویسندگان
چکیده
منابع مشابه
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
We present a new 4D printing approach that can create high resolution (up to a few microns), multimaterial shape memory polymer (SMP) architectures. The approach is based on high resolution projection microstereolithography (PμSL) and uses a family of photo-curable methacrylate based copolymer networks. We designed the constituents and compositions to exhibit desired thermomechanical behavior (...
متن کاملA Shape Memory Polymer with Improved Shape Recovery
Thermally actuated shape memory polymers (SMPs) interest, both academically and industrially, due to their ability to memorize a permanent shape that is set during processing and a temporary shape that is later programmed by manipulation above a critical temperature, either Tg or Tm. However, the thermal triggering process for SMPs is usually retarded compared to that of shape memory alloys, be...
متن کامل1D Printing of Recyclable Robots
Recent advances in 3D printing are revolutionizing manufacturing, enabling the fabrication of structures with unprecedented complexity and functionality. Yet biological systems are able to fabricate systems with far greater complexity using a process that involves assembling and folding a linear string. Here, we demonstrate a 1D printing system that uses an approach inspired by the ribosome to ...
متن کاملShape xity and shape recovery of polyurethane shape-memory polymer foams
The thermomechanical properties of polyurethane shape memory polymer (SMP) foams were investigated experimentally. The results obtained can be summarized as follows. (1) By cooling the foam after compressive deformation at high temperature, stress decreases and the deformed shape is xed. Stress decreases markedly in the region of temperature below the glass transition temperature Tg during th...
متن کاملHigh Cycle-life Shape Memory Polymer at High Temperature
High cycle-life is important for shape memory materials exposed to numerous cycles, and here we report shape memory polyimide that maintained both high shape fixity (Rf) and shape recovery (Rr) during the more than 1000 bending cycles tested. Its critical stress is 2.78 MPa at 250 °C, and the shape recovery process can produce stored energy of 0.218 J g(-1) at the efficiency of 31.3%. Its high ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Reports
سال: 2019
ISSN: 2045-2322
DOI: 10.1038/s41598-019-44110-9