A Building-Block Approach to State-Space Modeling of DC-DC Converter Systems
نویسندگان
چکیده
منابع مشابه
A State Space Modeling of Non-Isolated Bidirectional DC-DC Converter with Active Switch
In this paper, analysis, design and implementation of non-isolated soft-switching bidirectional DCDC converter with an active switch are described. The proposed topology gives the output voltage as twice as the input voltage and enhances the efficiency up to 94.5% and 92.9% for boost and buck mode operation by proper selection of the duty cycle. Soft switching can be achieved at both steps up a...
متن کاملA State-space Modeling of Non-ideal Dc-dc Converters
A modeling based on the practical switches with finite turn-on, turn-off, delay, storage and reverse recovery times is proposed. The switching effects on the state equation, system stability, dc gain and efficiency are shown for the boost, buck and buck-boost converters. The effect of switching time variation by current on system stability is given as an extension of the storage time modulation...
متن کاملDesign of a CMOS DC-DC Converter -Adaptive CMOS DC-DC Converter for a Portable Battery Powered Systems-
Abstract In this paper, we describe a CMOS DC-DC converter with a variable output voltage (8-12V @100mA) for a portable battery-operated system applications. The proposed DC-DC converter is used along with a Pulse-Frequency Modulation (PFM) method and consists of a reference circuit, a feedback resistor, a controller, and an internal oscillator. The integrated DC-DC converter with two external ...
متن کاملA Bi-Directional DC/DC Converter for Energy Storage Systems
This paper addresses a bi-directional dc/dc converter suitable for an energy storage system with an additional function of galvanic isolation. An energy storage device such as an electric double layer capacitor is directly connected to one of the dc buses of the dc/dc converter without any chopper circuit. Nevertheless, the dc/dc converter can continue operating when the voltage across the ener...
متن کاملModeling and Simulation of PSM DC-DC Buck Converter
A DC-to-DC converter for applications involving a source with widely varying voltage conditions with loads requiring constant voltage from full load down to no load is presented. The switching regulator considered is a Buck converter with Pulse Skipping Modulation control whereby pulses applied to the switch are blocked or released on output voltage crossing a predetermined value. Results of th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: J
سال: 2019
ISSN: 2571-8800
DOI: 10.3390/j2030018