A Compact C-Band Bandpass Filter with an Adjustable Dual-Band Suitable for Satellite Communication Systems
نویسندگان
چکیده
منابع مشابه
A Compact UWB Bandpass Filter with High Selectivity and Dual Notched-Band
A novel compact-sized ultra-wideband (UWB) bandpass filter (BPF) is proposed in this paper. The proposed BPF is highly selective and is able to eliminate WLAN signals from 5.15-5.35 GHz, and downlink of X-band satellite communication signals from 7.25-7.75 GHz. Generally, a multiple-mode resonator (MMR), comprised of a U-shaped line, with two high impedance stubs connected to it, and one steppe...
متن کاملNovel Compact Dual - Band Bandpass Microstrip Filter
In this paper, a novel microstrip structure is developed to realize a dual-band bandpass filter. The proposed bandpass structure uses a microstrip resonator with two independently controlled resonance frequencies producing two frequency bands of interest controlled by adjusting the dimensions of the resonator. Parametric analysis is performed on the structure to determine the optimum dimensions...
متن کاملFractal Bandpass Filter Using Y-shaped Dual-Mode Resonator for C-Band Receiver (Research Note)
In this study, a fractal, Y-shaped dual-mode resonator bandpass filter (BPF) with input-output cross-coupling is introduced. A parallel-coupling feed structure with a cross coupling has been used to generate two transmission zeroes (TZs) near the lower and upper cutoff frequency that can effectively improve the passband edge selectivity. Also, a fractal shaped based on conventional diamond and ...
متن کاملCompact Dual-Band Bandpass Waveguide Filter with H-Plane Inserts
A novel compact dual-band bandpass waveguide filter is presented in this paper. H-plane metal inserts with complementary split-ring resonators are implemented as resonating elements in the standard (WR-90) rectangular waveguide. Design starts from the models of the waveguide resonators with two resonant frequencies (9 GHz and 11 GHz) using a single flat or folded metal insert. Further, folded i...
متن کاملdesigning a microstrip dual-band bandpass filter (bpf) with suitable isolation between two passbands
this paper presents a new design for a microstrip dual-band band-pass microstrip filter (bpf) with suitable isolation between two passbands. in this design, a basic structure is used to achieve a desirable frequency characteristic in the passband. in this regard, defected ground structure (dgs) is implemented to reach optimum parameters of the filter such as bandwidth, return loss, insertion lo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Electronics
سال: 2020
ISSN: 2079-9292
DOI: 10.3390/electronics9071088