A Compact High-Stability Nanosecond Pulse Test System Using Corona-Stabilized Switch and Coaxial Resistance Divider
نویسندگان
چکیده
Due to the lack of a standard nanosecond high-voltage pulse generator for sensor calibration, high-stability test system was developed in terms circuit analysis, structural design, and performance test. By establishing equivalent model generator, component parameters five-stage Marx loop one-stage compression steepening unit were simulated. The influence action gap on characteristics output analyzed. established through design pulse-generating circuit, development high-performance corona-stabilized switch, measurement fast-response resistance divider made metal oxide thin-film resistors. has capability double exponential voltages amplitude range 10–60 kV with rise time 2.3 ± 0.5 ns half-peak 23 5 ns. In addition, voltage high consistency stability full range. maximum relative deviation peak value is 1.517%, uncertainty less than 5‰.
منابع مشابه
Compact Nanosecond Pulse Generator
A compact nanosecond pulse generator was designed and tested. The generator has a specially designed unit consisting of an HCEIcap 1000.2 capacitor and a multigap switch. The total inductance of the unit is 20 nH. The modifications made in the design allowed an increase in energy density up to 370 J/l at an electric field strength of 200 kV/mm. The volume of the capacitor active part is 2.3 l. ...
متن کاملA Multi-Level Storage Tank Gauging And Monitoring System Using A Nanosecond Pulse
In this paper, a one-port time-domain/frequencydomain based technique using a short-circuited coaxial geometry inserted vertically in a liquid tank is designed and presented as a multi-level storage tank gauge and monitor. For storage tanks of small physical liquid levels, the attenuation inside the coaxial cable sensor may be neglected and both the physical liquid levels and liquid permittivit...
متن کاملA Two-stage Inductive Voltage Divider for Coaxial Bridges
The traceability chain to derive the capacitance unit from the quantum Hall resistance coaxial bridges. These bridges employ a inductive voltage divider to provide the voltage ratio needed. One such divider has recently been constructed calibrated at Inmetro. The design techniques responsible for the small ratio errors of the device are detailed
متن کاملA Customer Oriented Approach for Distribution System Reliability Improvement using Optimal Distributed Generation and Switch Placement
The reliability of distribution networks is inherently low due to their radial nature, consequently distribution companies (DisCos) usually seek to improve the system reliability indices with the minimum possible investment cost. This can be known as system-oriented reliability planning (SORP). However, there can exist some customers that are not satisfied by their reliability determined by ado...
متن کاملHigh-power, Nanosecond-pulse Q-switch Laser Technology with Flattop Beam-shaping Technique for Efficient Industrial Laser Processing
High-power, nanosecond-pulse Q-switch laser processing has become commonplace in both existing and emerging high-tech industries. As these industries grow and mature, there is increased need for low-cost, high-quality manufacturing techniques. This translates to a need for increasingly precise and efficient laser processing capabilities. In this work, Newport/Spectra-Physics’ latest Q-switch di...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2023
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en16114534