A comparative study for the main properties of silica and carbon black Filled bagasse-styrene butadiene rubber composites

نویسندگان

چکیده

A comparative study has been done to investigate the effect of carbon black (CB) and fumed silica (Si) on physico-mechanical thermal properties Bagasse/styrene-butadiene rubber (B-SBR) composites. Based incorporation 25 phr from natural ground bagasse powder (GBP) as a supplement reinforcing filler in styrene butadiene (SBR) vulcanizates, two identical sets formulations have prepared using different concentrations (20, 40, 60 80 phr) main fillers SBR The employed this work, selective grain size distribution ranging about 20–180 μm. As well, 2.5 maleic anhydride (MA) was incorporated improve interfacial adhesion between bagasse. distinguishing rheological clearly established. Tensile strength, elongation at break, modulus 100% (M 100), hardness (Shore A), abrasion loss, degree swelling, well as, gravimetric analysis (TGA) vulcanizates were studied. samples morphologically analysed by scanning electron microscopy (SEM). tensile strength M values black-filled compounds obviously higher than those filled ones. In addition, hardness, wear swelling improved more increasing content. Whereas, Si B/SBR showed decreasing trend break but with an evidently plateau that CB Overall, recorded dominant mechanical compared vucanizates. On other hand, both offered noticeable improvement stability, preference favored for compounds. Furthermore, findings SEM found be agreement observed properties. This summarizes detailed discussion emerging green technologies tyre production depicted comprehensive data available literature.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of carbon black and fly ash co-fillers content on mechanical and thermal behaviors of styrene butadiene rubber compounds

Fly ash (FA) is produced as a waste byproduct during the burning process of coal in thermal power plants whose cost is primarily associated to cleaning and transportation. It possesses mechanical properties on account of its constituents like silica and alumina. The use of FA as filler in styrene butadiene rubber (SBR) was of researchers’ interest to reinforce and/or to reduce product cost. In ...

متن کامل

The Rheological Behavior of Wheat Starch Particulates Filled Uncured Styrene-Butadiene Rubber

This study treats one important aspect of starch-filled rubber compounds which is their rheological behavior. Starch-based SBR1712 masterbatches resulting from various formulations were prepared using a mini two roll mill and an internal mixer (Plastograph Brabender).The content in starch was varied from 0 to 50 phr. The effect of starch content on the rheological behavior was ev...

متن کامل

Mechanical, Electrical and Electro-Mechanical Properties of Thermoplastic Elastomer Styrene-Butadiene-Styrene/Multiwall Carbon Nanotubes Composites

Composites of styrene-butadiene-styrene (SBS) block copolymer with multiwall carbon nanotubes (MWCNT) were processed by solution casting in order to investigate the influence of filler content, the different ratio of styrene/butadiene in the copolymer and the architecture of the SBS matrix on the electrical, mechanical and electro-mechanical properties of the composites. It was found that fille...

متن کامل

a comparative study of the relationship between self-, peer-, and teacher-assessments in productive skills

تمایل به ارزیابی جایگزین و تعویض آن با آزمون سنتی مداد و کاغذ در سالهای اخیر افزایش یافته است. اکثر زبان آموزان در کلاس های زبان از نمره نهایی که استاد تعیین میکند ناراضی اند. این تحقیق جهت بررسی ارزیابی در کلاس های زبان انگلیسی به هدف رضایتمندی زبان آموزان از نمره هایشان انجام گرفته است که در آن نمرات ارائه شده توسط سه گروه ارزیاب (ارزیابی خود دانشجو، همسالان واستاد) در مهارت های تولید (تکل...

15 صفحه اول

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Polymers & Polymer Composites

سال: 2023

ISSN: ['1478-2391', '0967-3911']

DOI: https://doi.org/10.1177/09673911231171035