A Proposed Standard Test Method for Shear Failure and Estimation of Shear Strength of Japanese Cedar I.
نویسندگان
چکیده
منابع مشابه
A Test Method for the Determination of Shear Modulus and Shear Strength
Thi« report presents a method for determining shear modulus and shear strength of unidirectional flber-relnforced composites. The method Incorporates data from unlaxlal tensile and/or oompresslve tests at fiber orientations of 0, 45, and 90 degrees. The approach presented requires fewer specimens for shear strength determinations than current exlstinc procedures. ^ Distribution of this abstract...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
Validation and application of empirical shear wave velocity models based on standard penetration test
Shear wave velocity is a basic engineering tool required to define dynamic properties of soils. In many instances it may be preferable to determine Vs indirectly by common in-situ tests, such as the Standard Penetration Test. Many empirical correlations based on the Standard Penetration Test are broadly classified as regression techniques. However, no rigorous procedure has been published for c...
متن کاملBuckling and failure characteristics of slender web I-column girders under interactive compression and shear
Geometric and material nonlinear behavior of slender webs in I-column girders having stocky flanges under the action of combined lateral and axial loads is investigated. Interaction curves corresponding to the application of compressive and shear loads at buckling and ultimate stages for both web plates and column sections are plotted. In addition, the effects of flange and web slenderness rati...
متن کاملShear Strength of Fiber-Reinforced Clayey Sands
Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mokuzai Gakkaishi
سال: 2012
ISSN: 0021-4795,1880-7577
DOI: 10.2488/jwrs.58.260