A Resonant Z-Axis Aluminum Nitride Thin-Film Piezoelectric MEMS Accelerometer
نویسندگان
چکیده
منابع مشابه
Two-Port Stacked Piezoelectric Aluminum Nitride Contour-Mode Resonant MEMS
This paper reports on design, fabrication and experimental testing of a new class of two-port stacked piezoelectric aluminum nitride contour-mode micromechanical resonators that can be used for RF filtering and timing applications. This novel design consists of two layers of thin film AlN stacked on top of each other and excited in contour mode shapes using the d31 piezoelectric coefficient. Ma...
متن کاملDesign of Piezoelectric Aluminum Nitride MEMS Resonator
The following work reports the design, numerical, analytical and simulation characterization of an Aluminum Nitride MEMS resonator. The paper offers a comparison of rectangular plate MEMS resonator (length extensional and width extensional mode shapes) and ring shape MEMS resonator. It also demonstrates the contour Eigen modes of resonators and their equivalent electric circuit model (BVD). Fur...
متن کاملMEMS Pressure Sensor With Two Thin Film Piezoelectric Read-Out
We propose the structure to have only two pares of PZT thin films on the basis of [11]. This causes the structure to become simpler and easier to fabricate. And except its first vibration mode that is also the base mode, the other modes have no effect on the acceleration measurement. So it can be a better choice for the measurement of acceleration and it can have a huge potential as a micro-sen...
متن کاملSynthesis of Boron-Aluminum Nitride Thin Film by Chemical Vapour Deposition Using Gas Bubbler
Boron included aluminium nitride (B-AlN) thin films were synthesized on silicon (Si) substrates through chemical vapour deposition ( CVD ) at 773 K (500 °C). tert-buthylamine (tBuNH2) solution was used as nitrogen source and delivered through gas bubbler. B-AlN thin films were prepared on Si-100 substrates by varying gas mixture ratio of three precursors. The structural properties of the films ...
متن کاملAluminum Nitride Piezoelectric Micromachined Ultrasound Transducer Arrays
Air-coupled piezoelectric micromachined ultrasound transducer arrays, operating at ~190 kHz, have been fabricated utilizing an aluminum nitride piezoelectric layer. Improved fabrication processes have reduced the frequency variation seen in our previous work with single transducers resulting in arrays of transducers with resonant frequencies (fn) that match within the fractional half-power band...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Micromachines
سال: 2019
ISSN: 2072-666X
DOI: 10.3390/mi10090589