A strain-based finite element model for calcification progression in aortic valves
نویسندگان
چکیده
منابع مشابه
Calcification of bicuspid aortic valves.
Over the past decade, our concept of the pathogenesis of calcific aortic valve disease has undergone a major transformation. We now recognise that calcific valve disease is the end stage of an active disease process and is not caused by “wear and tear” of the valve tissue. Immunohistochemical studies of trileaflet aortic valves with varying degrees of valve stenosis have demonstrated the presen...
متن کاملAn Efficient Strain Based Cylindrical Shell Finite Element
The need for compatibility between degrees of freedom of various elements is a major problem encountered in practice during the modeling of complex structures; the problem is generally solved by an additional rotational degree of freedom [1-3]. This present paper investigates possible improvements to the performances of strain based cylindrical shell finite element [4] by introducing an additio...
متن کاملA NEW APPROACH BASED ON FINITE ELEMENT MODEL UPDATING FOR STRUCTURAL DAMAGE IDENTIFICATION
In this study, the finite element model updating was simulated by reducing the stiffness of the members. Due to lack of access to the experimental results, the data obtained from an analytical model were used in the proposed structural damage scenarios. The updating parameters for the studied structures were defined as a reduction coefficient applied to the stiffness of the members. Parameter v...
متن کاملA New Stress Based Approach for Nonlinear Finite Element Analysis
This article demonstrates a new approach for nonlinear finite element analysis. The methodology is very suitable and gives very accurate results in linear as well as in nonlinear range of the material behavior. Proposed methodology can be regarded as stress based finite element analysis as it is required to define the stress distribution within the structural body with structural idealization a...
متن کاملA New Eight Nodes Brick Finite Element Based on the Strain Approach
In this paper, a new three dimensional brick finite element based on the strain approach is presented with the purpose of identifying the most effective to analyze linear thick and thin plate bending problems. The developed element which has the three essential external degrees of freedom (U, V and W) at each of the eight corner nodes, is used with a modified elasticity matrix in order to satis...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Biomechanics
سال: 2017
ISSN: 0021-9290
DOI: 10.1016/j.jbiomech.2017.10.014