Active Vibration Control for Multiple Buildings Connected with Active Control Bridges. 2nd Report. Effectiveness of Bending and Torsional Vibration Control on Seismic Response Control of Four Model Buildings.
نویسندگان
چکیده
منابع مشابه
Active Tendons for Seismic Control of Buildings
In this study, active tendons with Proportional Integral Derivation type controllers were applied to a SDOF and a MDOF building model. Physical models of buildings were constituted with virtual springs, dampers and rigid masses. After that, equations of motion of all degrees of freedoms were obtained. Matlab Simulink was utilized to obtain the block diagrams for these equations of motion. Param...
متن کاملINVESTIGATION OF THE OPTIMAL SEMI-ACTIVE CONTROL STRATEGIES OF ADJACENT BUILDINGS CONNECTED WITH MAGNETORHEOLOGICAL DAMPERS
This study investigates the efficacy of optimal semi-active dampers for achieving the best results in seismic response mitigation of adjacent buildings connected to each other by magnetorheological (MR) dampers under earthquakes. One of the challenges in the application of this study is to develop an effective optimal control strategy that can fully utilize the capabilities of the MR dampers. H...
متن کاملOPTIMAL SLIDING MODE CONTROL FOR SEISMIC CONTROL OF BUILDINGS EQUIPPED WITH ATMD
Active tuned mass damper (ATMD) systems have attracted the considerable attention of researchers for protecting buildings subjected to earthquake loading. This paper presentes the development of an optimal sliding mode control (OSMC) system for a building equipped with ATMD. In the OSMC technique, a linear sliding surface is used with the slope of this surface designed such that a given (or des...
متن کاملActive vibration control of smart building frames by feedback controllers
In this paper the active vibration control of a four-story shear frame instrumented with piezoelectric actuators is presented. The piezoelectric actuators are hosted on the columns in two manners and the produced controlling forces by actuators are considered in the equation of motion. The smart structure modeling and control design is carried out using MATLAB software in state space form. Subs...
متن کاملVibration control of an automotive engine using active mounts
In this research, vibration control of national engine (EF7) using active mounts is studied for two different mounting layouts. The first layout is based on the current engine mounting of national engine (system of three passive mounts), but the hydraulic mount is substituted by an active mount. The other mounting layout contains 4 mounts, 2 of which are active ones and the others are passive m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1999
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.65.4286