Advantages of combined sintering compared to conventional sintering of mechanically activated magnesium titanate
نویسندگان
چکیده
منابع مشابه
The effect of sintering parameters on the microstructure and dielectric properties of bismuth titanate
In the present work, the effect of sintering parameters including sintering temperature, soaking time, and heating rate on densification, microstructure, and dielectrical properties of bismuth titanate (Bi4Ti3O12) ceramics were investigated. Bismuth titanate was synthesized by the solid state method and titanium oxide and bismuth oxide used as raw materials. X-ray diffraction (XRD) indicated, p...
متن کاملINITIAL SINTERING KINETICS OF LITHIUM META TITANATE AT CONSTANT RATES OF HEATING
In order to evaluate the sintering behavior of lithium meta titanate (Li2TiO3) powder, the shrinkage of powder compact was measured under constant rates of heating. Densification curves for Li2TiO3 have been constructed with the help of shrinkage powder measured at different heating rates. The activation energy at the initial stage of sintering was determined by analyzing the densification curv...
متن کاملSintering Properties of Mechanically Alloyed Ti-5Al-2.5Fe
In this study, Ti-5Al-2.5Fe alloy was prepared by powder metallurgy. The elemental titanium, aluminum, and iron powders were mechanically alloyed for 10 h in a vacuum atmosphere. A stainless steel jar and stainless steel balls were used for mechanical alloying. The alloyed powders were then sintered by vacuum hot pressing at 950 °C for a soaking time of 30 minutes. Pure titanium was also sinter...
متن کاملPRESSURELESS SINTERING OF B4C-NANOTiB2 NANOCOMPOSITE BY ADDITION OF Fe AND Ni AS SINTERING AIDS
B4C and its composites with TiB2 as second phase continues to be extensively used as the preferred ceramic material in military applications as armor systems for absorbing and dissipating kinetic energy from high velocity projectiles. It also exhibits a high melting point (2427 °C), and high neutron absorption cross section. Pressureless sintering of the B 4C-nanoTiB2 nanocomposite using small ...
متن کاملSintering of Fine Oxide Powders: II, Sintering Mechanisms
Conventional and new sintering mechanisms have been porous compacts is well-known in the ceramic literature. However, several reports have been presented recently that investigated using fine powders of CeO2 and Y2O3 of excellent sinterability. We have verified the validity of Herring’s show that particle/grain size can remain essentially constant up to a density of 92%, and such a resistance t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science of Sintering
سال: 2014
ISSN: 0350-820X,1820-7413
DOI: 10.2298/sos1403283f