Aeroelastic Response from Indicial Functions with a Finite Element Model of a Suspension Bridge
نویسندگان
چکیده
منابع مشابه
Finite Element Model Calibration of a Full Scale Bridge Using Measured Frequency Response Functions
A frequency response function based parameter estimation method is used for finite element model calibration of a full-scale bridge utilizing measured dynamic test data. Dynamic tests are performed on the bridge to obtain measured frequency response functions. Data quality is ensured by comparing measured data with the finite element model and removing erroneous data. A coherence data selector ...
متن کاملFull-Scale Bridge Finite-Element Model Calibration Using Measured Frequency-Response Functions
A frequency-response function–based parameter-estimation method was used for finite-element (FE) model calibration of a fullscale bridge using measured dynamic test data. Dynamic tests were performed on the bridge to obtain measured frequency-response functions. Data quality was ensured by comparing measured data with the FE model and removing erroneous data. A coherence data selector was devel...
متن کاملA Finite Element Model for Simulating Flow around a Well with Helically Symmetric Perforations
In a perforated well, fluids enter the wellbore through array of perforation tunnels. These perforations are typically distributed in a helical pattern around the wellbore. Available numerical models to simulate production flow into cased-and-perforated vertical wells have complicated boundary conditions or suffer from high computational costs. This paper presents a simple and at the same time ...
متن کاملFinite Element Model Updating of Scale Bridge Model Using Measured Modal Response Data AUTHORS
One of the most promising fields of finite element model updating involves using data obtained from the modal response of a structure to update a finite element model. The University of Central Florida (UCF) has constructed a scale model of a two span bridge. Using an impact hammer and accelerometers mounted on the structure, the first 17 natural frequencies and mode shapes were identified. Usi...
متن کاملHelicopter Blade Stability Analysis Using Aeroelastic Frequency Response Functions
In the present paper, the aeroelastic stability of helicopter rotor blade is determined using Aeroelastic Frequency Response Function. The conventional methods of aeroelastic stability usually use an iterative procedure while the present method does not require such approach. Aeroelastic Frequency Response Functions are obtained by inverting dynamic stiffness matrix of the aeroelastic system. S...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2017
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/276/1/012006