Age-dependent changes in post-crack performance of fibre reinforced shotcrete linings
نویسندگان
چکیده
منابع مشابه
Laboratory testing of steel fibre reinforced shotcrete
Uniaxial and triaxial compression tests on steel fibre reinforced shotcrete (SFRS) have been used to quantify the elastic–plastic response behaviour for both the peak and post-peak regions. The laboratory tests were conducted with a servo-controlled testing machine to obtain complete stress–strain curves. The test results include unconfined and triaxial compressive strengths, shear strengths an...
متن کاملInfluence of Fibre Content on Crack Propagation Rate in Fibre-Reinforced Concrete Beams
Experimental study on the influence of fibre content on crack behaviour and propagation in synthetic-fibre reinforced beams has been reported in this paper. The tensile behaviour of metallic fibre concrete is evaluated in terms of residual flexural tensile strength values determined from the load-crack mouth opening displacement curve or load-deflection curve obtained by applying a centre-point...
متن کاملDuctility Performance of Hybrid Fibre Reinforced Concrete
This study presents a study on the ductility performance of hybrid fibre reinforced concrete. The influence of fibre content on the ductility performance of hybrid fibre reinforced concrete specimens having different fibre volume fractions was investigated. The parameters of investigation included modulus of rupture, ultimate load, service load, ultimate and service load deflection, crack width...
متن کاملPolyamide Fiber Reinforced Shotcrete for Tunnel Application
This study intends to establish the mechanical properties of polyamide fiber reinforced shotcrete (PAFRS) in terms of compressive and flexural strengths, in accordance with ASTM C1609/C1609M-12. The mechanical properties identified the influence of polyamide fiber content on the PAFRS strength. This study evaluated the toughness of PAFRS and proposed additional toughness level criteria to bette...
متن کاملFractional Thermoelasticity Model of a 2D Problem of Mode-I Crack in a Fibre-Reinforced Thermal Environment
A model of fractional-order of thermoelasticity is applied to study a 2D problem of mode-I crack in a fibre-reinforced thermal environment. The crack is under prescribed distributions of heat and pressure. The normal mode analysis is applied to deduce exact formulae for displacements, stresses, and temperature. Variations of field quantities with the axial direction are illustrated graphically....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tunnelling and Underground Space Technology
سال: 2015
ISSN: 0886-7798
DOI: 10.1016/j.tust.2015.05.006