Alcoholysis of Waste Polyurethane Rigid Foam and Its Modification with Lignin for Recovery
نویسندگان
چکیده
منابع مشابه
Nonlinear Optical Properties of Rigid Polyurethane Foam/SiO2 Nanocomposite
Polyurethane closed cell (PUCC)/SiO2 nanocomposites have been prepared by using in situ polymerization approach. The third-order optical nonlinearities of PUCC/SiO2 nanocomposites, dissolved in DMF are characterized by Z-scan technique at the measurement wavelength of 532 nm. The nonlinear refractive (NLR) indices and nonlinear absorption (NLA) coefficients of samples were calculated from close...
متن کاملProducing Lignin-Based Polyols through Microwave-Assisted Liquefaction for Rigid Polyurethane Foam Production
Lignin-based polyols were synthesized through microwave-assisted liquefaction under different microwave heating times (5-30 min). The liquefaction reactions were carried out using polyethylene glycol (PEG-400)/glycerol as liquefying solvents and 97 wt% sulfur acid as a catalyst at 140 °C. The polyols obtained were analyzed for their yield, composition and structural characteristics using gel pe...
متن کاملFlexible thermoplastic composite of Polyvinyl Butyral (PVB) and waste of rigid Polyurethane foam
This study reports the preparation and characterization of composites with recycled poly(vinyl butyral) (PVB) and residue of rigid polyurethane foam (PUr), with PUr contents of 20, 35 and 50 wt %, using an extruder equipped with a Maillefer single screw and injection molding. The components of the composites were thermally characterized using differential scanning calorimetry (DSC) and thermogr...
متن کاملfire behavior of rigid polyurethane foam and metal faced polyurethane sandwich panels and its fire hazard assessment
reaction to fire of fire-retarded rigid pur foams and two types of metal faced rigid polyurethane foam core sandwich panel was evaluated by using cone calorimeter test method. the tests were carried out in various radiative heat fluxes from 15 to 75 kw/m2. the radiation rate effect on reaction to fire parameters, including time to ignition (tti), peak of heat release rate (prhr), total heat rel...
متن کاملWaste Minimization Strategy: Flexible Polyurethane Foam Manufacture
Methylene chloride and CFCs are used as auxiliary blowing agents in the manufacture of flexible polyurethanefoams and are promptly emitted during the manufacturing processes.The concentrationof the auxiliary blowing agent are quite low due to the accepted practice of using large volumes of air to lower the ambient concentration of toxic isocyanates (a key chemical in the urethane reaction seque...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Renewable Materials
سال: 2021
ISSN: 2164-6341
DOI: 10.32604/jrm.2021.015400