Alternative Sintering Technology of Printed Nanoparticles for Roll-to-Roll Process
نویسندگان
چکیده
منابع مشابه
Inkjet printing and rapid ebeam sintering enable formation of highly conductive patterns in roll to roll process
Electron beam sintering at ambient pressure is demonstrated for the first time, in formation of highly conductive silver patterns composed of silver nanoparticles. Silver nanoparticles were inkjet printed on a plastic substrate, followed by rapid ebeam irradiation, without causing any damage to the substrate. It was found that exposing the printed silver patterns to a dose of 600 kGy yielded a ...
متن کاملA fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors
Roll-to-roll (R2R) printing has been pursued as a commercially viable high-throughput technology to manufacture flexible, disposable, and inexpensive printed electronic devices. However, in recent years, pessimism has prevailed because of the barriers faced when attempting to fabricate and integrate thin film transistors (TFTs) using an R2R printing method. In this paper, we report 20 × 20 acti...
متن کاملAnode Layer Linear Ion Source for Roll-to-Roll Process from 300 mm to 1550 mm
Roll-to-roll (RTR) process requires a linear surface treatment source in various processes such as pre-treatment, etching, and deposition. For high speed and large width processes the linear source should have superior characteristics that can be applied to 100~300 m/mim process and large width treatment up to 2 m. Several linear surface treatment sources have been proposed to the RTR process. ...
متن کاملA roll-to-roll welding process for planarized silver nanowire electrodes.
We demonstrate continuous roll-to-roll production of highly conductive silver network films on a plastic substrate via mechanical and chemical welding processes. This process included three essential steps: (i) solvent spraying, (ii) roll compression, and (iii) salt treatment and washing. The sheet resistance of the resulting AgNW film was 5 Ω sq(-1) at 92% transmittance, which was the lowest s...
متن کاملRoll to roll printable technology platform consisting of electrolyte-based components
A lot of effort has been spent on developing components in the field of organic electronics. Some of the components have shown excellent performance and also printability. However, printed electronics has not yet reached the market. One reason for this is that the integration of components into useful products has proven more challenging than expected. One of the major challenges is the large v...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Microelectronics and Packaging Society
سال: 2014
ISSN: 1226-9360
DOI: 10.6117/kmeps.2014.21.4.015