Ambient vibration testing and operational modal analysis of monopole telecoms structures
نویسندگان
چکیده
منابع مشابه
modal parameter identification using ambient vibration testing with introducing a new software
the ambient vibration measurement is a kind of output data-only dynamic testing where the traffics and winds are used as agents responsible for natural or environmental excitation. therefore an experimental modal analysis procedure for ambient vibration testing needs to base itself on output-only data. the modal analysis involving output-only measurements present a challenge that requires the u...
متن کاملOperational modal analysis for the characterization of heritage structures
Assessing and reducing the seismic risks associated with historical structures require an appropriate knowledge of structural behaviour and characteristics, as suggested by recent national and international guidelines concerning cultural heritage. However, historical structures are characterised by a high level of uncertainty, which affects material properties and structural schemes and is rela...
متن کاملAmbient Vibration Tests of Structures − a Review
A literature review on the subject of ambient vibration testing is presented, and a review of a recent study to illustrate state-of-the-art in the application of the ambient vibration method. Reports on testing of full-scale structures by the ambient vibration method began to appear regularly around 1970, with about 3/4 of all contributions devoted to the experiments in buildings, dams, chimney...
متن کاملOperational Modal Analysis on Structures with Rotating Parts
Operational Modal Analysis was originally invented for vibration analysis on civil engineering structures exposed to ambient excitation being purely stochastic and broadband in nature. When performing Operational Modal Analysis on civil or mechanical engineering structures with dominating rotating parts, the original algorithms are often inadequate in providing accurate results due to determini...
متن کاملComparison of Ambient and Forced Vibration Testing of Civil Engineering Structures
In this paper the state the art methods for Ambient (AVT) and Forced Vibration Testing (FVT) are compared. First two new methods to conduct ambient tests are introduced, which allow sensor roving of one group while measuring another group of sensors. The systems compared were concurrently used during a number of tests aimed at damage detection performed on the bridge Z24 in Switzerland. Some of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Civil Structural Health Monitoring
سال: 2021
ISSN: 2190-5452,2190-5479
DOI: 10.1007/s13349-021-00499-4