Analyses of Microstructure Evolutions during Reverse Phase Transformations in Alloyed Steels Using Calculated Phase Diagrams.
نویسندگان
چکیده
منابع مشابه
Some phase transformations in steels
About 70% of all the steel compositions that are currently used have been developed within the last 10 years. Novel iron alloys are being conceived, manufactured, and marketed with a regularity which has confounded many prophecies. Phase transformation theory has contributed to the successful development of steels. This overview will begin therefore with a discussion of the atomic mechanism by ...
متن کاملPhase-field modeling of microstructure evolutions in magnetic materials.
Recently, the phase-field method has been extended and utilized across many fields of materials science. Since this method can incorporate, systematically, the effect of the coherency induced by lattice mismatch and the applied stress as well as the external electrical and magnetic fields, it has been applied to many material processes including solidification, solid-state phase transformations...
متن کاملsynthesis of platinum nanostructures in two phase system
چکیده پلاتین، فلزی نجیب، پایدار و گران قیمت با خاصیت کاتالیزوری زیاد است که کاربرد های صنعتی فراوانی دارد. کمپلکس های پلاتین(ii) به عنوان دارو های ضد سرطان شناخته شدند و در شیمی درمانی بیماران سرطانی کاربرد دارند. خاصیت کاتالیزوری و عملکرد گزینشی پلاتین مستقیماً به اندازه و- شکل ماده ی پلاتینی بستگی دارد. بعضی از نانو ذرات فلزی در سطح مشترک مایع- مایع سنتز شده اند، اما نانو ساختار های پلاتین ب...
Phase Transformations Contributing to the Properties of Modern Steels
The role of phase transformation theory in contributing to the development of innovative steels is assessed, focusing on examples where the relationship is transparent. Virtually all of the major transformations, ranging from those which necessarily involve diffusion, to others where the change in crystal structure is achieved by a deformation, are considered.
متن کاملHigh Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materia Japan
سال: 1999
ISSN: 1340-2625,1884-5843
DOI: 10.2320/materia.38.975