Analysis of Characteristic Process Parameters to Identify Unstable Process Conditions during Wire EDM
نویسندگان
چکیده
منابع مشابه
consequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
Modeling and Optimization of Wire EDM Process
The present work is aimed to optimize the parameters of (WEDM) process by considering the effect of input parameters viz. Time On, Time Off, Wire Speed & Wire Feed. Experiments have been conducted with these parameters in three different levels data related to process responses viz. Metal removal rate, surface roughness (Ra) have been measured for each of the experimental run. These data have b...
متن کاملOptimization of EDM Process Parameters: A Review
Electrical Discharge Machining performance is generally evaluated on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), Relative Wear Ratio (RWR) and Surface Roughness (SR). The important EDM machining parameters affecting to the performance measures of the process are discharge current, pulse on time, pulse off time, arc gap, and duty cycle [9]. A considerable amount of work has b...
متن کاملExperimental Investigation of Wire-EDM Process Parameters on MRR of Ti-6al-4v Alloy
The objective of the present work was to investigate the effect of the wire electrical discharge machining process parameters on material removal rate of titanium alloy using Taguchi approach. A brass wire of 250μm was applied as a tool electrode to cut the specimen. L36 mixed orthogonal array (2 ×3) has been selected for experimentation under different variables like dielectric conductivity, p...
متن کاملeffect of the micro wire-edm process parameters on the recast layer in the molybdenum micromachining
the micro wire electrical discharge machining (micro wire-edm) process is a modern machining process with various applications in manufacturing micro-parts. the recast layer remaining on the machined surfaces is an inevitable complication of this process. this layer can subsequently affect the machined parts performance. to optimize the recast layer in the micro wire-edm of the molybdenum micro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2018
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2018.11.018