ANALYSIS OF TEST PLASTIC SAMPLES PRINTED BY THE ADDITIVE METHOD FUSED FILAMENT FABRICATION
نویسندگان
چکیده
منابع مشابه
Simple and Versatile 3D Printed Microfluidics Using Fused Filament Fabrication.
The uptake of microfluidics by the wider scientific community has been limited by the fabrication barrier created by the skills and equipment required for the production of traditional microfluidic devices. Here we present simple 3D printed microfluidic devices using an inexpensive and readily accessible printer with commercially available printer materials. We demonstrate that previously repor...
متن کاملColored fused filament fabrication
Fig. 1. Our technique enables color printing with precisely controlled gradients using a filament printer. Le : The printer is equipped with an o -the-shelf nozzle that inputs multiple filaments (three in the picture) and outputs molten mixed plastic through a single exit hole. Such devices cannot directly be used to print gradients: the transition between mixtures takes time, and this timing v...
متن کاملFabrication and optimisation of a fused filament 3D-printed microfluidic platform
A 3D-printed microfluidic device was designed and manufactured using a low cost ($2000) consumer grade fusion deposition modelling (FDM) 3D printer. FDM printers are not typically used, or are capable, of producing the fine detailed structures required for microfluidic fabrication. However, in this work, the optical transparency of the device was improved through manufacture optimisation to suc...
متن کاملFabrication and optimisation of a fused filament 3D-printed microfluidic platform
A 3D-printed microfluidic device was designed and manufactured using a low cost ($2000) consumer grade fusion deposition modelling (FDM) 3D printer. FDM printers are not typically used, or are capable, of producing the fine detailed structures required for microfluidic fabrication. However, in this work, the optical transparency of the device was improved through manufacture optimisation to suc...
متن کاملFabrication and optimisation of a fused filament 3D-printed microfluidic platform
A 3D-printed microfluidic device was designed and manufactured using a low cost ($2000) consumer grade fusion deposition modelling (FDM) 3D printer. FDM printers are not typically used, or are capable, of producing the fine detailed structures required for microfluidic fabrication. However, in this work, the optical transparency of the device was improved through manufacture optimisation to suc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MM Science Journal
سال: 2021
ISSN: 1803-1269,1805-0476
DOI: 10.17973/mmsj.2021_03_2020075