Analysis on High-Power Seaport LED Luminaire with Uniform Light Distribution Based on Optimized Lens and Heatsink
نویسندگان
چکیده
منابع مشابه
Degradation analysis of secondary lens system and its effect on performance of LED-based luminaire
Degradation of a secondary lens system and its effect on LED-based luminaire performance are investigated. A polycarbonate plastic lens system is selected as a test vehicle. The lens system is aged under an actual user condition using high power warm white LEDs. The spectral power distributions (SPDs) of the LED/lens assembly are obtained before and after 9500 h of continuous operation. A detai...
متن کاملDesign Optimization of a High Power LED Matrix Luminaire
This work presents a methodology for optimizing the layout and geometry of an m× n high power (HP) light emitting diode (LED) luminaire. Two simulators are used to analyze an LED luminaire model. The first simulator uses the finite element method (FEM) to analyze the thermal dissipation, and the second simulator uses the ray tracing method for lighting analysis. The thermal and lighting analysi...
متن کاملapplication of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولFreeform LED lens for uniform illumination.
Light flux from LED must be redistributed to meet the needs of lighting in most cases, a new method is proposed for its secondary optic design. Based on refractive equation and energy conservation, a set of first-order partial differential equations which represent the characters of LED source and desired illumination were presented. The freeform lens was constructed by solving these equations ...
متن کاملcomparison of bond strength of metal and ceramic brackets bonded with conventional and high-power led light curing units
objectives: the aim of this study was to evaluate the effect of conventional and high-power light emitting diode (led) light curing units on shear bond strength (sbs) of metal and ceramic brackets to tooth surface. materials and methods: forty sound bovine maxillary central incisors were used for the study. the teeth were divided into four groups (n=10). teeth surfaces were etched with 37% phos...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Sciences
سال: 2021
ISSN: 2076-3417
DOI: 10.3390/app11094035