Analytical Approach for Loss Minimization in Distribution Systems by Optimum Placement and Sizing of Distributed Generation

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

coordination of protective schemes in distribution and subtransmission systems including distributed generation

نصب منابع پراکنده در سیستم های توزیع و فوق توزیع علاوه بر مزیت های فراوان، مشکلاتی را هم به همراه دارد. یکی از این مشکلات تأثیر این منابع روی اندازه جریان های اتصال کوتاه است. به طور معمول از حفاظت های مبتنی بر اصل جریان زیاد در سیستم های توزیع و فوق توزیع استفاده می شود. از مهمترین طرح های حفاظتی استفاده شده در فیدرهای توزیع، حفاظت فیوز- ریکلوزر است. همچنین از طرح های حفاظتی جریان زیاد جهتی در...

Optimal Sizing and Placement of Distributed Generation in Radial Distribution Feeder Using Analytical Approach

A Radial Distribution network is important in power system area because of its simple design and reduced cost. Impact of Distributed generation in radial distribution feeder is increased because of its application of green technology and it also meet out some of the power system issues. Allocation of Distributed Generation at non-optimal places leads to increased power loss and reduced bus volt...

متن کامل

A Customer Oriented Approach for Distribution System Reliability Improvement using Optimal Distributed Generation and Switch Placement

The reliability of distribution networks is inherently low due to their radial nature, consequently distribution companies (DisCos) usually seek to improve the system reliability indices with the minimum possible investment cost. This can be known as system-oriented reliability planning (SORP). However, there can exist some customers that are not satisfied by their reliability determined by ado...

متن کامل

Optimal Placement of Distributed Generation for Real Power Loss Minimization

Distributed Generation is the generation of electricity from many small energy sources and is located closer to the user, or customer. This paper presents analytical method to determine the optimal location to place a distributed generation in radial feeder model to minimize the real power loss of the system. The analytical expression and the methodology are based on the power flow method. The ...

متن کامل

Optimal Placement and Sizing of Distributed Generations in Unbalanced Distribution Networks Considering Load Models and Uncertainties

Development of distributed generations’ technology, trends in the use of these sources to improve some of the problems such as high losses, low reliability, low power quality and high costs in distributed networks. Choose the correct location to install and proper capacity of these sources, such as important things that must be considered in their use. Since distribution networks are actu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: MATEC Web of Conferences

سال: 2016

ISSN: 2261-236X

DOI: 10.1051/matecconf/20165701027