Anodic Dissolution Mechanisms of Copper in Alkaline Carbonate-Chloride Solution
نویسندگان
چکیده
منابع مشابه
External control of anodic dissolution mechanisms of 100Cr6 in nitrate/chloride mixed electrolytes
The anodic dissolution of 100Cr6 steel in neutral electrolytes containing sodium chloride and sodium nitrate was investigated potentiodynamically and galvanodynamically with a rotating disc electrode at room temperature. The total concentration of the mixed electrolyte was 3 mol L with variation of chloride/nitrate mole ratios. The potentiodynamic linear sweep voltammograms (LSVs) in mixed elec...
متن کاملEffect of Sodium Dodecyl Sulfate on Copper Anodic Dissolution in Phosphoric Acid Solution
In Electrochemical Mechanical Planarization process (ECMP), concentrated phosphoric acid is usually used as electrolyte. Role of sodium dodecyl sulfate (SDS) in anodic dissolution of Cu in concentrated phosphoric acid was studied by Cyclic Voltammetry (CV), inhibition efficiency (IE) calculation and in-situ observation of the Cu electrode surface at anodic overpotentials. It was found that pres...
متن کاملSYNERGISTIC INFLUENCE OF NITRITE ON INHIBITION OF MILD STEEL CORROSION IN CHLORIDE CONTAMINATED ALKALINE SOLUTION
Corrosion behavior of mild steel in chloride contaminated alkaline solution has been studied for the period up to 100days. Saturated Calcium hydroxide solution was used as alkaline solution and 0.5M NaCl solution was used to accelerate mild steel corrosion. The Charge transfer resistance Rct, Current density Icorr and inhibition efficiency values were obtained from tafel polarization and electr...
متن کاملتولید اکسید مس به روش الکتـروشیمیـایی
The electrochemical process of cuprous oxide production is by the anodic dissolution of copper in an alkaline concentrated sodium chloride solution. The initial chloride in the electrolyte cell provides a condition for the formation of cuprous chlorocomplex anions. In the end,the cuprous oxide is formed through the anions hydrolysis by the hydroxyl ions, which are generated in the cathodic reac...
متن کاملCalcium Carbonate Dissolution Rate in Limestone Contactors
The project summarized here investigated some of the parameters and relationships used to predict the performance of limestone contactors. The purpose of the project was to study the effect of limestone composition, especially the dolomite [CaMg(CO 3) 2 ] and impurity content of the stone, on the kinetics of carbonate mineral dissolution and to determine the effect of temperature on the rate of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CORROSION ENGINEERING
سال: 1990
ISSN: 0010-9355,1884-1155
DOI: 10.3323/jcorr1974.39.1_10