Application Status of Chemical Admixture with Concrete Using Various Mixture Materials
نویسندگان
چکیده
منابع مشابه
Identification of various chemical phenomena in concrete using thermal analysis
Chemical changes that occur in concrete at the microstructure level due to environmental effects are normally identified by SEM, XRD, thermal analysis and by chemical analysis. In the present investigation, the chemical compounds formed in various chemical reactions are quantified using thermal analysis. The concrete having characteristic compressive strength of 20 MPa was subjected to undergo ...
متن کاملValue of Admixture in Concrete Mix Design
Despite its few inherent shortcomings, concrete has proved to be the most widely used construction material, no substitute in time still to come. In the present investigation, study of admixture of concrete was carried out. The strength of concrete depends on its mix proportions. We used so many admixture e.g. ‘silica. Fumes, fly ash etc , when we used these type of admixture the result was ver...
متن کاملselected of the best mixture and application of aerated concrete
an application of aerated concret (foam concrete) was experimentally studied. in this study the compressive strength of the proposed concrete was measured the effect of parameters such as aggregate size of broken stone, quantity of cement and various densities were exprementally studies, and the best mixture was select.these prepared mixtures are practically useful to optimize the consumption o...
متن کاملEvaluation of Gasoline Engine Piston with Various Coating Materials Using Finite Element Method
The purpose of this paper is to examine the piston stress distribution using several thicknesses of the coating materials to achieve higher gasoline engine performance. First of all, finite element structure analysis is used to uncoated petrol piston made of aluminum alloy. Then, steel and cast iron piston materials are conducted and compared with the aluminum piston. After that, investigation ...
متن کاملExperimental Studies on Concrete with Bentonite as Mineral Admixture
The present investigation deals with effect of bentonite clay on concrete. The concrete was produced by partial replacement of OPC with mineral admixture bentonite clay in percentages of 0%, 5%, 10%, 15% and 20%. The M20 grade of concrete was designed. The compressive strength, split tensile strength and flexural strength were found for the specimens. The present investigation is to study the e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Concrete Journal
سال: 2014
ISSN: 0387-1061,2186-2753
DOI: 10.3151/coj.52.480