Arc Augmented Laser Cladding Process.

Laser-powder-material interactions in the laser cladding process

In this paper we present briefly two possible approaches for modelling the laser cladding process. The first approach is 2D and consists in finding the shape of the molten pool given the fraction of the laser power which is available at the surface of the workpiece and given the amount of powder sticking to the molten pool. The powder reaching the workpiece is assumed to melt instantaneously at...

Modelling and optimization of advanced submerged arc welding process for stainless steel cladding

Industries involved in surfacing operations use various fusion welding especially arc welding processes. These operations demand high deposition rates but at low penetration values in the base metal. Conventional SAW, besides its high deposition characteristics, employs high values of welding current and is not many times favoured for surfacing due to high degree of dilution of surfacing alloys...

Friction Surface Cladding FRICTION SURFACE CLADDING DEVELOPMENT OF A SOLID STATE CLADDING PROCESS

Closed Loop Control of 3d Laser Cladding

In this paper, a heat input closed-loop control system based on infrared image sensing for 3D laser cladding is introduced. A high frame-rate (up to 800 frames/s) camera is installed coaxially on the top of the laser-nozzle setup. Complete of the infrared images of the molten pool can be acquired with a short nozzle-substrate distance in different scanning directions, eliminating the noise from...

Modeling of Heat Transfer and Fluid Flow in the Laser Multilayered Cladding Process

The current work examines the heat-and-mass transfer process in the laser multilayered cladding of H13 tool steel powder by numerical modeling and experimental validation. A multiphase transient model is developed to investigate the evolution of the temperature field and flow velocity of the liquid phase in the molten pool. The solid region of the substrate and solidified clad, the liquid regio...